# Sea-Doo Jet Pump Seal 73-110-06 – SBT OEM Replacement
The **Sea-Doo Jet Pump Seal 73-110-06** is a new SBT aftermarket OEM replacement jet pump seal designed for compatible **Sea-Doo personal watercraft applications across the listed 1998–2018 model-year range**.
This replacement seal is associated with Sea-Doo OEM reference **293250084** and is listed for selected models within the RX, XP, GTX, GS, GTI, LRV, 3D, RXT and GTS ranges.
The jet pump is an essential component of a Sea-Doo personal watercraft’s propulsion system. It uses a rotating impeller to accelerate water through the pump assembly, generating the thrust required to move the watercraft.
Seals are important components within the jet pump assembly, helping maintain the intended sealing arrangement between mating surfaces or components.
Over time, jet pump seals may deteriorate due to age, exposure to water, repeated servicing, mechanical damage or general wear.
A damaged, incorrectly seated or deteriorated seal may affect the sealing performance of the associated pump assembly.
The **SBT 73-110-06** provides a replacement option for compatible Sea-Doo applications requiring OEM reference 293250084.
This product is suitable for consideration during routine jet pump maintenance, pump disassembly, component replacement and propulsion system repairs.
**Important:** This is a new SBT aftermarket OEM replacement seal, not a genuine BRP or Sea-Doo OEM component.
## Product Details
– **Brand:** SBT
– **SKU:** 73-110-06
– **Product Type:** Jet Pump Seal
– **Condition:** New
– **Replacement Type:** Aftermarket OEM Replacement
– **Watercraft Brand:** Sea-Doo
– **OEM Reference:** 293250084
– **Listed Model Families:** RX, XP, GTX, GS, GTI, LRV, 3D, RXT and GTS
– **Listed Year Range:** 1998–2018
– **Application:** Compatible Sea-Doo Jet Pump Assemblies
– **Purpose:** Replacement of the Specified Jet Pump Seal
## Sea-Doo OEM Reference Number
The **Sea-Doo Jet Pump Seal 73-110-06** is associated with the following OEM reference:
**293250084**
This number is an important reference when identifying the correct replacement seal.
When servicing a Sea-Doo jet pump, always compare the original component or applicable parts diagram with the replacement part listing.
Although multiple Sea-Doo models may use similar jet pump components, not all seals are interchangeable.
## Compatible Sea-Doo Models
The **Sea-Doo Jet Pump Seal 73-110-06** is listed for selected applications within the following Sea-Doo model families.
| Sea-Doo Model Family | Listed Overall Year Range |
|—|—|
| Sea-Doo RX | 1998–2018 |
| Sea-Doo XP | 1998–2018 |
| Sea-Doo GTX | 1998–2018 |
| Sea-Doo GS | 1998–2018 |
| Sea-Doo GTI | 1998–2018 |
| Sea-Doo LRV | 1998–2018 |
| Sea-Doo 3D | 1998–2018 |
| Sea-Doo RXT | 1998–2018 |
| Sea-Doo GTS | 1998–2018 |
**Compatibility Note:** The 1998–2018 period is the overall range provided for the product listing. It does not mean every model family was manufactured throughout that period or that every variant and model year is compatible.
Fitment must be verified using the exact Sea-Doo model, production year, jet pump configuration and OEM reference 293250084.
## Features & Benefits
### New SBT Replacement Seal
A new aftermarket replacement component supplied by SBT for compatible Sea-Doo jet pump applications.
### OEM Reference Compatibility
Associated with Sea-Doo OEM reference 293250084 to assist with accurate replacement part identification.
### Wide Sea-Doo Model Coverage
Listed for selected applications within several Sea-Doo model families, including GTX, GTI, XP, RX and RXT.
### Jet Pump Maintenance Application
Suitable for replacement of the specified seal during compatible jet pump servicing and repairs.
### Helps Restore the Intended Sealing Arrangement
Replacing a confirmed worn or damaged seal can help restore the sealing condition of the relevant pump assembly.
### Suitable for Jet Pump Rebuilding
Relevant to compatible jet pump disassembly, inspection and rebuilding work.
### Replacement for Older Sea-Doo Models
Provides a replacement option for compatible Sea-Doo personal watercraft within the listed application range.
## What Is a Sea-Doo Jet Pump Seal?
A jet pump seal is a component used within a personal watercraft’s jet pump assembly.
Its purpose depends on its specific position and the design of the pump.
Seals may be used to help prevent unwanted water or lubricant movement across designated sealing surfaces.
They may also form part of an assembly where correct sealing is important for the intended operation of surrounding components.
The **Sea-Doo Jet Pump Seal 73-110-06** is specifically identified as a replacement for OEM reference 293250084.
The supplied product information does not specify its exact installation position, dimensions or sealing material.
For this reason, the applicable Sea-Doo parts diagram should be consulted before installation.
## Understanding the Sea-Doo Jet Pump System
Sea-Doo personal watercraft use a jet propulsion system rather than a conventional exposed marine propeller.
The engine provides rotational power to the driveline, which drives the jet pump impeller.
As the impeller rotates, water is drawn into the pump and accelerated toward the outlet.
This movement of water generates the thrust required for propulsion.
Depending on the model and pump configuration, associated components may include:
– Jet pump housing
– Impeller
– Impeller shaft
– Pump bearings
– Seals
– Wear ring
– Pump cone or associated housing components
– Retaining hardware
– Nozzle assembly
Each component contributes to the operation of the propulsion system.
The **SBT 73-110-06** is specifically a jet pump seal and should not be confused with a complete jet pump rebuild kit.
## Why Are Jet Pump Seals Important?
Seals help maintain the intended separation between areas or surfaces within a mechanical assembly.
In a personal watercraft jet pump, proper sealing is important for maintaining the condition and operation of associated components.
A seal that has become damaged, distorted or incorrectly installed may no longer perform its intended function.
Depending on its location, a failed seal may contribute to unwanted fluid movement or deterioration of surrounding components.
Replacing a confirmed damaged seal during jet pump servicing can help restore the intended sealing arrangement.
The **Sea-Doo Jet Pump Seal 73-110-06** provides an SBT replacement option for the specified OEM reference.
## Signs of a Worn or Damaged Jet Pump Seal
Possible signs of a worn or damaged seal may include:
– Visible cracks or splitting
– Flattened or distorted sealing surfaces
– Hardening or deterioration
– Tears or cuts
– Damage caused during disassembly
– Incorrect seating
– Signs of leakage around the relevant sealing area
– Contamination affecting associated components
– Corrosion or deterioration near the sealing location
Not all jet pump problems are caused by a damaged seal.
Unusual noise, vibration or propulsion issues may also result from worn bearings, damaged impellers, incorrect pump assembly or other mechanical faults.
The exact cause should be identified before replacing components.
## Why Replace Your Sea-Doo Jet Pump Seal?
Jet pump seals can deteriorate over time due to age, environmental exposure and mechanical wear.
Some seals may also be damaged during pump disassembly or removal.
Replacing a seal that is worn, damaged or unsuitable for reuse can be an important part of jet pump maintenance.
The **SBT 73-110-06** provides a new replacement option for compatible Sea-Doo applications requiring OEM reference 293250084.
When replacing the seal, it is also recommended to inspect the surrounding components and mating surfaces.
Damage to the sealing surface or incorrect assembly may affect the performance of a new seal.
## Understanding Sea-Doo Jet Pump Compatibility
Sea-Doo has produced a wide variety of personal watercraft with different engine configurations, pump assemblies and driveline designs.
Although several models may share certain components, not every jet pump seal is interchangeable.
Compatibility should be confirmed using:
– Exact Sea-Doo model
– Production year
– Engine configuration
– Jet pump assembly
– Original OEM part number
– Seal installation position
– Seal dimensions
– Applicable BRP parts diagram
The **Sea-Doo Jet Pump Seal 73-110-06** is listed for selected applications within the RX, XP, GTX, GS, GTI, LRV, 3D, RXT and GTS families.
Always verify OEM reference 293250084 before ordering.
## Understanding OEM Reference 293250084
The **SBT 73-110-06** is associated with Sea-Doo OEM reference **293250084**.
This reference can be used when checking parts diagrams, identifying the original component or comparing replacement listings.
Before purchasing, confirm that the original jet pump assembly requires this specific OEM reference.
This is particularly important when working on older Sea-Doo watercraft or models that have undergone jet pump modifications or component replacements.
## Jet Pump Seal vs Wear Ring
A jet pump seal and a wear ring perform different functions.
### Jet Pump Seal
A sealing component used in a designated position within the jet pump assembly.
### Wear Ring
A component that forms the close-fitting surface around the impeller in applicable jet pump designs.
### Why the Difference Matters
Although both components may be serviced during jet pump maintenance, they are not interchangeable.
The **SBT 73-110-06** is listed as a jet pump seal, not a wear ring.
## Jet Pump Seal vs Carbon Seal
A jet pump seal should also not automatically be confused with a Sea-Doo driveline carbon seal.
### Jet Pump Seal
The component identified by SBT SKU 73-110-06 and OEM reference 293250084.
### Carbon Seal
A separate sealing component used in certain Sea-Doo driveline arrangements.
### Why the Difference Matters
Different seals have different installation positions and functions.
Always confirm the correct component using the applicable parts diagram.
## Ideal for Sea-Doo Jet Pump Servicing
The **Sea-Doo Jet Pump Seal 73-110-06** is relevant to:
– Compatible Sea-Doo jet pump repairs
– Jet pump disassembly
– Seal replacement
– Pump inspection
– Propulsion system maintenance
– Jet pump rebuilding
– Repairs requiring OEM reference 293250084
– Maintenance of compatible Sea-Doo personal watercraft
## Important Installation Information
Correct seal installation is important for the intended operation of the jet pump assembly.
Before installation:
1. Confirm that SBT SKU 73-110-06 matches the required seal.
2. Verify the exact Sea-Doo model.
3. Confirm the production year.
4. Check OEM reference 293250084.
5. Identify the correct jet pump assembly.
6. Consult the appropriate Sea-Doo service manual.
7. Identify the seal’s installation position.
8. Inspect the original seal for wear or damage.
9. Inspect surrounding pump components.
10. Check the relevant sealing surfaces for corrosion or scoring.
11. Remove the original seal using the specified procedure.
12. Clean the installation area according to the service manual.
13. Compare the replacement seal with the original component.
14. Confirm the correct dimensions and profile.
15. Check the required installation orientation.
16. Use only the lubricants or sealants specified for that application.
17. Install the replacement seal using the manufacturer’s recommended procedure.
18. Avoid damaging or distorting the seal during installation.
19. Confirm that the seal is correctly seated.
20. Reassemble the jet pump according to the service manual.
21. Complete the required inspections and checks before returning the watercraft to service.
**Important:** Incorrect seal installation may affect the intended sealing performance of the assembly.
Professional installation by an experienced Sea-Doo technician is recommended.
## Important Product Information
**Brand:** SBT
**SKU:** 73-110-06
**Product:** Jet Pump Seal
**Condition:** New
**Watercraft Brand:** Sea-Doo
**OEM Reference:** 293250084
**Listed Models:** RX, XP, GTX, GS, GTI, LRV, 3D, RXT and GTS
**Overall Listed Years:** 1998–2018
**Replacement Type:** Aftermarket OEM Replacement
**Application:** Compatible Sea-Doo Jet Pump Assemblies
**Please Note:**
– This is a new SBT aftermarket replacement component.
– It is not a genuine BRP or Sea-Doo OEM part.
– The overall listed application range is 1998–2018.
– Not every listed model family or variant is compatible with every year in that range.
– Always verify compatibility using OEM reference 293250084.
– The exact seal dimensions and material specifications have not been supplied.
– The exact installation position should be confirmed using the applicable parts diagram.
– This listing is for the specified jet pump seal, not a complete rebuild kit.
– Inspect associated pump components during replacement.
– Professional installation is recommended.
The **Sea-Doo Jet Pump Seal 73-110-06** by SBT is a new aftermarket OEM replacement seal listed for selected Sea-Doo RX, XP, GTX, GS, GTI, LRV, 3D, RXT and GTS applications within the overall 1998–2018 model-year range. Associated with Sea-Doo OEM reference 293250084, this component is intended for compatible jet pump maintenance, seal replacement and propulsion system repairs.





