# Sea-Doo Supercharged Engine Rebuild Kit 55-113E-1 – SBT 0.5mm Oversize
The **Sea-Doo Engine Rebuild Kit 55-113E-1** is a comprehensive engine rebuilding kit manufactured by **SBT**, designed for compatible supercharged Sea-Doo 4-stroke personal watercraft engines.
Featuring **0.5mm oversize pistons**, this kit is intended for engine rebuilds requiring cylinder machining to accommodate pistons larger than the original standard bore size.
The SBT 55-113E-1 includes a selection of essential internal engine components, including piston and ring sets, crankshaft bearings, connecting rod bearings, counterbalance shaft bearings, an internal gasket kit, a timing chain and an oil spray nozzle kit.
This rebuild kit is designed for compatible Sea-Doo supercharged 4-stroke engines, **excluding Sea-Doo 300-series and Spark engines**.
Whether you’re rebuilding a worn engine, repairing internal engine damage or restoring a supercharged Sea-Doo personal watercraft, the SBT 55-113E-1 provides a convenient package of major engine rebuilding components.
## Product Details
– **Brand:** SBT
– **SKU:** 55-113E-1
– **Product Type:** Engine Rebuild Kit
– **Watercraft Brand:** Sea-Doo
– **Engine Type:** 4-Stroke
– **Application:** Compatible Supercharged Sea-Doo Engines
– **Piston Size:** 0.5mm Oversize
– **Piston Quantity:** 3
– **Includes:** Pistons, Rings, Bearings, Gaskets, Timing Chain and Oil Spray Nozzle Kit
– **Exclusions:** Sea-Doo 300-Series and Spark Engines
– **Application:** Internal Engine Rebuilding
## What’s Included in the Kit?
The **Sea-Doo Engine Rebuild Kit 55-113E-1** includes the following components:
| Component | Included |
|—|—|
| 4-Stroke Counterbalance Shaft Bearing Set | Yes |
| 4-Stroke Main Bearings | Yes |
| 4-Stroke Connecting Rod Bearings | Yes |
| Internal Gasket Kit | Yes |
| SBT 4-Stroke Timing Chain | Yes |
| Oil Spray Nozzle Kit | Yes |
| Piston and Ring Sets | 3 |
| Piston Oversize | 0.5mm |
This kit supplies several major internal components commonly required during a Sea-Doo engine rebuild.
**Important:** The kit is not stated to include a crankshaft, connecting rods, cylinder head, valves or complete engine assembly.
Additional parts may be required depending on the condition of the engine.
## Compatible Sea-Doo Engines
The SBT 55-113E-1 is intended for compatible supercharged Sea-Doo 4-stroke engines.
| Engine Application | Compatibility |
|—|—|
| Compatible Sea-Doo Supercharged 4-Stroke Engines | Yes |
| Sea-Doo 300-Series Engines | No |
| Sea-Doo Spark Engines | No |
| Naturally Aspirated Engines | Not confirmed for this kit |
**Important:** Compatibility depends on the exact engine model, production year and internal engine specifications.
Not all Sea-Doo supercharged engines use identical internal components.
Always verify your engine model and required piston size before ordering.
## Features & Benefits
### Comprehensive Engine Rebuild Kit
Includes several essential internal engine components in one convenient package.
### 0.5mm Oversize Pistons
Supplied with three oversize piston and ring sets for engines requiring the corresponding cylinder bore dimensions.
### Main Bearing Set
Includes 4-stroke main bearings used to support the crankshaft within the engine crankcase.
### Connecting Rod Bearings
Supplies rod bearings for the connecting rod and crankshaft journal assemblies.
### Counterbalance Shaft Bearings
Includes bearings for the engine’s counterbalance shaft arrangement.
### SBT Timing Chain
Contains a replacement 4-stroke timing chain used to maintain the correct relationship between the crankshaft and camshaft timing system.
### Internal Gasket Kit
Provides internal engine gaskets required for applicable rebuilding procedures.
### Oil Spray Nozzle Kit
Includes replacement oil spray nozzle components used within the engine lubrication system.
## What Does a Sea-Doo Engine Rebuild Kit Do?
The **Sea-Doo Engine Rebuild Kit 55-113E-1** supplies major internal components used during the rebuilding of a compatible supercharged Sea-Doo engine.
Over time, engine components can experience wear from repeated combustion cycles, friction, heat and mechanical loads.
An engine rebuild involves inspecting, measuring and replacing components as required to restore the engine’s mechanical condition.
The SBT 55-113E-1 provides several of the parts commonly needed during this process.
### Pistons and Piston Rings
Pistons transfer combustion forces through the connecting rods to the crankshaft.
Piston rings help maintain combustion chamber sealing, control oil and transfer heat to the cylinder walls.
### Main Bearings
Main bearings support the crankshaft and allow it to rotate within the crankcase.
### Connecting Rod Bearings
Rod bearings provide bearing surfaces between the connecting rods and crankshaft journals.
### Counterbalance Shaft Bearings
These bearings support the counterbalance shaft, which helps manage engine vibration.
### Timing Chain
The timing chain helps maintain the correct mechanical relationship between crankshaft and camshaft rotation.
### Oil Spray Nozzles
Oil spray nozzles form part of the engine’s lubrication arrangement, directing oil to designated internal components.
### Internal Gaskets
Gaskets provide sealing between specified engine components and mating surfaces.
## Understanding 0.5mm Oversize Pistons
The **Sea-Doo Engine Rebuild Kit 55-113E-1** includes pistons that are 0.5mm larger in nominal diameter than the corresponding standard-size pistons.
Oversize pistons are typically used when engine cylinders require machining to restore the correct bore condition.
This may be necessary when the original cylinder surfaces show wear, scoring or other damage.
**Important:** A 0.5mm oversize piston cannot simply be installed into an unmodified standard-size cylinder bore.
Before installation, the cylinder bores must be measured and prepared to achieve the correct piston-to-cylinder clearance.
Cylinder machining must be performed according to the piston manufacturer’s specifications and the applicable engine service procedures.
Incorrect piston sizing or bore clearance can result in serious engine damage.
## Signs Your Sea-Doo Engine May Need Rebuilding
Possible signs of internal engine wear or damage include:
– Low engine compression
– Excessive oil consumption
– Unusual mechanical knocking
– Damaged pistons or piston rings
– Worn crankshaft bearings
– Metal particles in engine oil
– Cylinder scoring
– Reduced engine performance
– Internal engine damage following overheating or lubrication failure
These symptoms do not automatically mean that a complete engine rebuild is necessary.
A thorough mechanical inspection and appropriate measurements should be performed before ordering rebuild components.
## Why Choose an SBT Engine Rebuild Kit?
The **Sea-Doo Engine Rebuild Kit 55-113E-1** provides a convenient way to obtain several major rebuilding components together.
Instead of sourcing each listed component separately, the kit combines pistons, rings, bearings, gaskets, timing chain and oil spray nozzle components into one package.
This makes it suitable for workshops and experienced engine rebuilders completing internal repairs on compatible supercharged Sea-Doo engines.
## Ideal for Sea-Doo Engine Rebuilding
This SBT rebuild kit is suitable for:
– Supercharged Sea-Doo engine rebuilding
– Internal engine repairs
– Replacing worn pistons and rings
– Crankshaft bearing replacement
– Connecting rod bearing replacement
– Counterbalance shaft bearing replacement
– Timing chain replacement
– Cylinder machining and oversize piston installation
– Personal watercraft engine restoration
## Important Installation Information
Engine rebuilding requires specialist mechanical knowledge, precision measuring equipment and the correct service procedures.
Before installation:
1. Confirm that SKU 55-113E is compatible with your exact Sea-Doo engine.
2. Verify that the engine is a supported supercharged 4-stroke application.
3. Confirm that the engine is not a Sea-Doo 300-series or Spark application.
4. Disassemble the engine according to the manufacturer’s service manual.
5. Inspect the crankshaft, connecting rods, cylinders and crankcase.
6. Measure the cylinder bores and assess their condition.
7. Confirm that 0.5mm oversize pistons are appropriate for the required machining.
8. Have the cylinders professionally machined where necessary.
9. Check piston-to-cylinder clearances and piston ring end gaps.
10. Confirm bearing clearances using the appropriate measuring procedures.
11. Install the timing chain and verify correct engine timing.
12. Install the supplied oil spray nozzle components as specified.
13. Replace applicable gaskets and seals during reassembly.
14. Follow the manufacturer’s lubrication, torque and assembly procedures.
15. Check engine operation and follow the appropriate post-rebuild running-in procedure.
**Important:** Incorrect cylinder machining, bearing clearances, engine timing or assembly can cause serious engine damage.
Professional installation by an experienced personal watercraft engine technician is strongly recommended.
## Important Product Information
**Brand:** SBT
**SKU:** 55-113E-1
**Product:** Supercharged Engine Rebuild Kit
**Engine Type:** 4-Stroke
**Piston Size:** 0.5mm Oversize
**Piston Quantity:** 3
**Application:** Compatible Sea-Doo Supercharged Engines
**Kit Includes:**
– 4-Stroke Counterbalance Shaft Bearing Set
– 4-Stroke Main Bearings
– 4-Stroke Rod Bearings
– Internal Gasket Kit
– SBT 4-Stroke Timing Chain
– Oil Spray Nozzle Kit
– 3 Piston and Ring Sets – 0.5mm Oversize
**Please Note:**
– This kit is for compatible supercharged Sea-Doo 4-stroke engines.
– Not suitable for Sea-Doo 300-series engines.
– Not suitable for Sea-Doo Spark engines.
– Pistons are 0.5mm oversize, not standard size.
– Cylinder machining and measurement may be required.
– Additional engine components may be required depending on the condition of the engine.
– Exact engine and model compatibility must be verified before ordering.
The **Sea-Doo Engine Rebuild Kit 55-113E-1** by SBT provides a comprehensive selection of internal engine rebuilding components for compatible supercharged Sea-Doo 4-stroke engines. Featuring three 0.5mm oversize piston and ring sets, bearings, internal gaskets, a timing chain and an oil spray nozzle kit, it is designed to support major engine repairs and rebuilding projects.





