# Mikuni SBN Needle & Seat 35-161-12 – SBT 1.2mm Viton Tip Sea-Doo / Yamaha / Kawasaki / Polaris / Tigershark
The **Mikuni SBN Needle and Seat 35-161-12** is an aftermarket replacement carburettor needle and seat kit supplied by **SBT**, designed for compatible Mikuni SBN 34mm and 44mm carburettors used in selected personal watercraft.
Featuring a **1.2mm seat** and a **Viton-tipped needle**, this kit provides replacement components for the carburettor’s fuel metering system.
The needle and seat assembly controls the flow of fuel entering the carburettor’s metering chamber. Correct operation is important for maintaining consistent fuel delivery and reliable engine performance.
This kit is suitable for selected Sea-Doo, Polaris, Yamaha, Tigershark and Kawasaki personal watercraft fitted with compatible Mikuni SBN carburettors.
Whether you’re rebuilding a carburettor, replacing worn fuel metering components or addressing fuel leakage problems, the SBT 35-161-12 provides a replacement solution.
**One kit services one carburettor.**
## Product Details
– **Brand:** SBT
– **SKU:** 35-161-12
– **Product Type:** Carburettor Needle and Seat Kit
– **Carburettor Type:** Mikuni SBN
– **Carburettor Sizes:** 34mm / 44mm
– **Seat Size:** 1.2mm
– **Needle Tip:** Viton
– **Application:** Selected Personal Watercraft Carburettors
– **Quantity:** Kit for 1 Carburettor
– **Function:** Carburettor Fuel Metering
## Compatible Personal Watercraft
The **Mikuni SBN Needle and Seat 35-161-12** is intended for compatible Mikuni SBN 34mm and 44mm carburettors used in selected personal watercraft applications.
### Compatible Manufacturer Applications
| Manufacturer | Application |
|—|—|
| Sea-Doo | Selected models with compatible Mikuni SBN carburettors |
| Yamaha | Selected models with compatible Mikuni SBN carburettors |
| Kawasaki | Selected models with compatible Mikuni SBN carburettors |
| Polaris | Selected models with compatible Mikuni SBN carburettors |
| Tigershark | Selected models with compatible Mikuni SBN carburettors |
### Carburettor Specifications
| Specification | Details |
|—|—|
| Carburettor Type | Mikuni SBN |
| Carburettor Size | 34mm |
| Carburettor Size | 44mm |
| Needle Tip | Viton |
| Seat Diameter | 1.2mm |
| Kit Quantity | 1 Carburettor |
**Important:** Not every personal watercraft from these manufacturers uses a Mikuni SBN carburettor.
Additionally, not every SBN 34mm or 44mm carburettor requires a 1.2mm needle and seat.
Always confirm the existing needle and seat size and carburettor specifications before ordering.
## Features & Benefits
### SBT Aftermarket Replacement
Supplied by SBT as a replacement needle and seat assembly for compatible Mikuni SBN carburettors.
### 1.2mm Seat Size
Designed for carburettors requiring a 1.2mm needle and seat assembly.
### Viton-Tipped Needle
Features a Viton tip designed to seal against the carburettor seat.
### Fuel Flow Regulation
Helps regulate the flow of fuel entering the carburettor’s metering chamber.
### Suitable for Carburettor Rebuilding
Ideal for replacing worn or damaged needle and seat components during carburettor servicing.
### Single Carburettor Kit
One kit is intended to service one compatible carburettor.
## What Does a Mikuni SBN Needle and Seat Do?
The **Mikuni SBN Needle and Seat 35-161-12** is part of the carburettor’s fuel metering system.
In a diaphragm-style Mikuni SBN carburettor, the needle and seat assembly works with the metering lever and diaphragm to control fuel entering the metering chamber.
When fuel is required, the metering mechanism allows the needle to lift from its seat.
As the needle opens, fuel can enter the metering chamber.
When the needle closes against the seat, it helps stop additional fuel from entering.
This process supports the correct supply of fuel to the engine.
A worn, contaminated or damaged needle and seat may prevent the assembly from sealing correctly, potentially causing excessive fuel delivery or other carburettor problems.
## What Is the Purpose of the Viton Tip?
The replacement needle features a **Viton tip**.
Viton is a fluoroelastomer commonly used in fuel system sealing applications because of its resistance to many fuels and chemicals.
The needle tip provides the sealing surface that contacts the seat when the fuel metering mechanism closes.
A damaged or deteriorated needle tip may prevent the assembly from sealing correctly.
Replacing a worn needle and seat helps restore the intended fuel metering function when the correct components are installed and adjusted.
## Signs of a Worn or Damaged Needle and Seat
Common symptoms of needle and seat problems include:
– Fuel leaking through the carburettor
– Engine flooding
– Difficult engine starting
– Rough or inconsistent idling
– Excessively rich fuel mixture
– Poor throttle response
– Engine hesitation
– Irregular fuel delivery
– Incorrect carburettor pop-off pressure
– Visible wear or damage to the needle tip
– Needle and seat failing a pressure test
These symptoms may also be caused by other fuel system or engine faults.
Inspect and test the carburettor before determining which components require replacement.
## Why Replace Your Mikuni SBN Needle and Seat?
The needle and seat assembly is exposed to repeated operation and continuous contact with fuel.
Over time, the needle tip or seat may become worn, contaminated or damaged.
A needle that no longer seals correctly may allow excessive fuel into the metering chamber.
This can affect engine starting, idling and overall carburettor operation.
Replacing a confirmed faulty assembly helps restore the intended fuel metering function.
The **Mikuni SBN Needle and Seat 35-161-12** provides an SBT replacement option for compatible Mikuni SBN 34mm and 44mm carburettors requiring a 1.2mm seat.
## Ideal for Carburettor Maintenance
This replacement kit is suitable for:
– Mikuni SBN carburettor rebuilding
– Needle and seat replacement
– Fuel metering repairs
– Carburettor fuel leakage repairs
– Engine flooding diagnosis
– Pop-off pressure troubleshooting
– Sea-Doo carburettor maintenance
– Yamaha carburettor maintenance
– Kawasaki carburettor maintenance
– Polaris carburettor maintenance
– Tigershark carburettor maintenance
## Important Installation Information
Before installing the replacement needle and seat:
1. Confirm that SBT 35-161-12 matches your carburettor.
2. Verify that the carburettor is a compatible Mikuni SBN 34mm or 44mm model.
3. Confirm the required 1.2mm seat size.
4. Follow the applicable Mikuni carburettor service procedure.
5. Remove and disassemble the carburettor as instructed.
6. Inspect the original needle and seat for wear or damage.
7. Clean the relevant fuel passages and sealing surfaces.
8. Install the replacement needle and seat correctly.
9. Inspect the metering lever, diaphragm and associated components.
10. Check pop-off pressure using the appropriate testing equipment.
11. Verify that the needle and seat seal correctly.
12. Reassemble the carburettor according to the service procedure.
13. Check for fuel leaks and confirm correct engine operation before returning the watercraft to service.
**Important:** Incorrect needle and seat sizing, metering lever adjustment or pop-off pressure can cause fuel delivery problems and potentially damage the engine.
Professional installation is recommended.
## Important Product Information
**Brand:** SBT
**SKU:** 35-161-12
**Product:** Mikuni SBN Needle and Seat Kit
**Carburettor Type:** Mikuni SBN
**Carburettor Sizes:** 34mm / 44mm
**Seat Size:** 1.2mm
**Needle Tip:** Viton
**Quantity:** Kit for 1 Carburettor
**Selected Manufacturer Applications:**
– Sea-Doo
– Yamaha
– Kawasaki
– Polaris
– Tigershark
Please confirm your exact carburettor model, needle and seat dimensions, and required seat size before ordering.
This listing is for **one replacement needle and seat kit**, sufficient for one compatible carburettor. It is not a complete carburettor rebuild kit.
The **Mikuni SBN Needle and Seat 35-161-12** by SBT provides a 1.2mm Viton-tipped replacement needle and seat assembly for compatible Mikuni SBN 34mm and 44mm carburettors, making it suitable for fuel metering repairs, carburettor rebuilding and general personal watercraft maintenance.





