# Sea-Doo 4-Tec Cylinder Head (Bare) – Excludes 300 / 130 / Spark – SBT 29-112-02
The **Sea-Doo 4-Tec Cylinder Head 29-112-02** by SBT is a new aftermarket bare cylinder head casting designed for compatible **Sea-Doo 4-Tec four-stroke engines**, excluding the **300, 130 and Spark** applications specified in the product listing.
Manufactured as a **new SBT cylinder head casting**, this replacement head is supplied with **valve guides and valve seats**, providing the foundation for rebuilding or replacing a damaged cylinder head.
Unlike a complete cylinder head assembly, the **SBT 29-112-02 Bare Cylinder Head** does not include the internal valve train components required for a complete installation.
**All additional internal components must be purchased separately.**
This product is suitable for engine rebuilds and cylinder head repairs where a replacement casting is required and the necessary internal components will be sourced or transferred separately, subject to inspection and compatibility.
## Product Details
– **Brand:** SBT
– **SKU / Code:** 29-112-02
– **Product Type:** Bare Cylinder Head Casting
– **Compatible Make:** Sea-Doo
– **Engine Application:** Selected Sea-Doo 4-Tec Engines
– **Excluded Applications:** Sea-Doo 300, 130 and Spark
– **Condition:** New
– **Cylinder Head Casting:** Included
– **Valve Guides:** Included
– **Valve Seats:** Included
– **Internal Valve Train Components:** Not Included
– **Application:** Cylinder Head Replacement / Engine Rebuild
– **Replacement Type:** Aftermarket
## Compatible Sea-Doo Engines
| Engine / Application | Compatibility |
|—|—|
| Selected Sea-Doo 4-Tec Engines | Listed Application |
| Sea-Doo 300 | Excluded |
| Sea-Doo 130 | Excluded |
| Sea-Doo Spark | Excluded |
**Important Compatibility Note:** The supplied product information identifies this cylinder head for Sea-Doo 4-Tec applications with the exclusions listed above. Exact model names and production years have not been specified.
Confirm compatibility with your specific engine before ordering.
## What’s Included?
The **SBT Sea-Doo 4-Tec Bare Cylinder Head 29-112-02** includes:
– 1 × New SBT Cylinder Head Casting
– Valve Guides
– Valve Seats
### What’s Not Included?
This is a **bare cylinder head**, not a complete assembled cylinder head.
Additional components must be purchased separately as required, including:
– Intake Valves
– Exhaust Valves
– Valve Springs
– Valve Stem Seals
– Valve Cotters / Retainers
– Camshaft Components
– Other Required Valve Train Components
– Gaskets and Installation Hardware
**Please Note:** The exact additional components required will depend on your engine configuration and whether existing components are suitable for reuse.
## Features & Benefits
– **New SBT Cylinder Head Casting:** Replacement casting for compatible Sea-Doo 4-Tec engines.
– **Valve Guides Included:** Supplied as part of the bare head.
– **Valve Seats Included:** Provides the valve seating surfaces required for cylinder head assembly.
– **Engine Rebuild Application:** Suitable for rebuilding a compatible cylinder head using separately sourced internal components.
– **Replacement for Damaged Castings:** An option when the original cylinder head is cracked, warped or otherwise damaged.
– **Bare Head Configuration:** Allows the installer to source the required internal components separately.
– **SBT Aftermarket Replacement:** New replacement casting for applicable Sea-Doo engines.
## What Does a Cylinder Head Do?
The cylinder head is a major component of a four-stroke engine.
It forms the upper section of the combustion chambers and houses the components responsible for controlling intake and exhaust gas flow.
The cylinder head supports the engine’s valve train, allowing the intake and exhaust valves to open and close at the correct points during engine operation.
A correctly assembled and installed cylinder head is essential for maintaining compression, valve operation and proper engine performance.
## What Is a Bare Cylinder Head?
A **bare cylinder head** is a replacement casting supplied without the complete internal valve train assembly.
The **SBT 29-112-02** includes the cylinder head casting, valve guides and valve seats.
However, the valves, springs, seals and other internal components required to complete the cylinder head assembly must be sourced separately.
This configuration may be useful when the original cylinder head casting is damaged but some existing internal components remain suitable for reuse.
All reused components should be inspected and measured before installation.
## Why Replace Your Sea-Doo 4-Tec Cylinder Head?
Cylinder head replacement may be necessary when the original casting has suffered damage that cannot be repaired economically or safely.
Common reasons for cylinder head replacement include:
– Cracked Cylinder Head Casting
– Overheating Damage
– Warped Cylinder Head Surface
– Damaged Valve Seat Areas
– Excessive Corrosion
– Internal Mechanical Damage
– Compression Loss Caused by Cylinder Head Faults
– Damage Discovered During an Engine Rebuild
These issues may also involve other engine components, so a complete inspection is recommended before purchasing replacement parts.
## Important Installation Information
The **SBT Sea-Doo 4-Tec Bare Cylinder Head 29-112-02** requires additional assembly before it can be installed onto an engine.
Recommended installation considerations include:
1. Confirm compatibility with your exact Sea-Doo 4-Tec engine.
2. Inspect the new cylinder head casting before assembly.
3. Source all required internal valve train components.
4. Inspect any existing components intended for reuse.
5. Check valve guides, seats and valve sealing.
6. Assemble the valve train according to the appropriate Sea-Doo service manual.
7. Check valve clearances and any required adjustments.
8. Install the cylinder head using the correct gaskets and hardware.
9. Follow the specified tightening sequence and torque requirements.
10. Verify camshaft timing and engine operation before use.
**Professional engine assembly is strongly recommended**, as incorrect cylinder head assembly or valve timing can cause serious engine damage.
## Important Product Information
– **Brand:** SBT
– **SKU:** 29-112-02
– **Product:** Sea-Doo 4-Tec Bare Cylinder Head
– **Condition:** New Casting
– **Included:** Cylinder Head Casting, Valve Guides and Valve Seats
– **Internal Components:** Sold Separately
– **Excluded Applications:** Sea-Doo 300, 130 and Spark
– **Application:** Cylinder Head Replacement / Engine Rebuild
– **Replacement Type:** SBT Aftermarket
– Exact model and year compatibility must be confirmed before ordering.
– This product is not supplied as a complete ready-to-install cylinder head assembly.
## Rebuild Your Sea-Doo 4-Tec Engine with SBT
The **SBT Sea-Doo 4-Tec Bare Cylinder Head 29-112-02** provides a new replacement casting for compatible Sea-Doo four-stroke engines.
Supplied with **valve guides and valve seats**, this bare cylinder head offers a foundation for engine rebuilding and cylinder head replacement.
Designed for selected **Sea-Doo 4-Tec applications, excluding 300, 130 and Spark models**, the SBT 29-112-02 is suitable for repairs requiring a replacement cylinder head casting.
**Important: This is a bare cylinder head only. All additional internal components must be purchased separately before installation.**





