Crankshaft Connecting Rod for Yamaha 500 (PRE ORDER)

$222.00 (inc GST)

Available on back-order

*NOTE* All Pre-Orders & Custom Orders Can Have Up To A 3-4 Week Lead Time

SKU: 23-400-124 Categories: , ,

# PRE ORDER – Yamaha 500 Crankshaft Connecting Rod 23-400-124 – SBT

The **Yamaha 500 Connecting Rod 23-400-124** is a new aftermarket OE replacement crankshaft connecting rod supplied by **SBT**, designed for compatible Yamaha 500 two-stroke personal watercraft engines.

This replacement connecting rod is supplied with **washers, a piston pin, a lower rod bearing and a wrist-pin bearing**, providing essential components for compatible crankshaft and connecting rod rebuilding applications.

Connecting rods are important internal engine components responsible for transferring the movement of the piston to the crankshaft.

During engine operation, the connecting rod experiences repeated mechanical loads as the piston moves up and down inside the cylinder.

In Yamaha two-stroke engines, connecting rods must withstand rapid changes in direction, high rotational speeds and significant combustion forces.

Over time, connecting rods and their associated bearings may become worn or damaged due to mechanical stress, corrosion, contamination, lubrication problems or internal engine failure.

A worn or damaged connecting rod assembly may contribute to unusual engine knocking, excessive vibration, abnormal crankshaft movement and potentially serious internal engine damage.

The **SBT 23-400-124** provides a replacement option for compatible Yamaha 500 crankshaft assemblies requiring this connecting rod and associated components.

**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.

## Product Details

– **Brand:** SBT
– **SKU:** 23-400-124
– **Product Type:** Crankshaft Connecting Rod
– **Watercraft Brand:** Yamaha
– **Engine Application:** Yamaha 500
– **Engine Type:** Two-Stroke
– **Replacement Type:** New Aftermarket OE Replacement
– **Application:** Connecting Rod Replacement and Crankshaft Rebuilding
– **Condition:** New
– **Availability:** PRE ORDER

## What’s Included?

The **Yamaha 500 Connecting Rod 23-400-124** is supplied with:

– Connecting rod
– Washers
– Piston pin
– Lower rod bearing
– Wrist-pin bearing

These components are included according to the supplied product description.

**Important:** The number of washers, exact dimensions and any additional hardware have not been specified. A complete crankshaft assembly is not stated as being included.

## Compatible Yamaha Engines

The **Yamaha 500 Connecting Rod 23-400-124** is listed for compatible Yamaha 500 crankshaft applications.

| Yamaha Engine | Component Application |
|—|—|
| Yamaha 500 | Crankshaft Connecting Rod Replacement |

**Important:** Exact Yamaha watercraft models and production years have not been supplied.

Always verify that **SBT part number 23-400-124** matches the original connecting rod and required crankshaft configuration before ordering.

## Features & Benefits

### New SBT Replacement Connecting Rod

Supplied as a new aftermarket OE replacement connecting rod for compatible Yamaha 500 engines.

### Includes Associated Components

Supplied with washers, piston pin, lower rod bearing and wrist-pin bearing.

### Suitable for Crankshaft Rebuilding

Designed for connecting rod replacement during compatible crankshaft rebuilding and engine repair applications.

### Supports Piston-to-Crankshaft Movement

The connecting rod transfers piston movement to the crankshaft during engine operation.

### Yamaha 500 Engine Application

Listed for compatible Yamaha 500 two-stroke personal watercraft engines.

### Replacement for Worn or Damaged Components

Provides an option for replacing a connecting rod assembly that has been confirmed as worn or damaged.

### Pre-Order Availability

Available for pre-order, subject to supplier availability.

## What Does a Connecting Rod Do?

The **Yamaha 500 Connecting Rod 23-400-124** is designed to connect the piston assembly to the crankshaft.

During engine operation, combustion forces push the piston down inside the cylinder.

The connecting rod transfers this movement to the crankshaft, helping convert the piston’s reciprocating motion into rotational motion.

As the crankshaft rotates, the connecting rod also guides the piston through its repeated upward and downward movement.

Connecting rods experience significant mechanical loads and must maintain their intended alignment and bearing clearances.

Correct connecting rod condition, bearing fitment and installation are important for reliable engine operation.

## Understanding the Connecting Rod Assembly

A connecting rod assembly contains several components that work together to transfer mechanical movement.

### Connecting Rod

The main component connecting the piston to the crankshaft.

### Piston Pin

The pin used to connect the piston and connecting rod at the small end.

### Lower Rod Bearing

The bearing located at the connecting rod’s larger crankshaft end.

### Wrist-Pin Bearing

The bearing used at the connecting rod’s smaller piston end.

### Washers

Components used in the connecting rod assembly according to the required crankshaft design.

The **SBT 23-400-124** includes these components as described in the supplied product information.

## What Is a Lower Rod Bearing?

The lower rod bearing, also known as the big-end bearing, is positioned at the crankshaft end of the connecting rod.

This bearing allows relative movement between the connecting rod and crankshaft journal during engine operation.

It experiences repeated mechanical loads as combustion forces are transferred through the connecting rod.

A worn or damaged lower rod bearing may cause excessive play, mechanical noise or damage to the crankshaft assembly.

The **Yamaha 500 Connecting Rod 23-400-124** includes a lower rod bearing for the specified replacement application.

## What Is a Wrist-Pin Bearing?

The wrist-pin bearing is located at the small end of the connecting rod, where the rod connects to the piston through the piston pin.

This bearing allows the connecting rod to pivot relative to the piston during engine operation.

It experiences repeated movement as the piston travels through the cylinder.

A worn wrist-pin bearing may contribute to excessive movement, mechanical noise and damage to the piston or connecting rod assembly.

The **SBT 23-400-124** includes a wrist-pin bearing as part of the supplied components.

## Why Are Connecting Rod Washers Important?

Connecting rod washers are used in certain crankshaft designs to help maintain the intended spacing and side-clearance arrangement of the connecting rod.

Correct washer selection and installation are important during crankshaft rebuilding.

Incorrect components or improper assembly may affect connecting rod movement and crankshaft operation.

The **Yamaha 500 Connecting Rod 23-400-124** is supplied with washers according to the product description.

Always confirm the correct washer quantity, position and installation requirements using the appropriate service information.

## Understanding Yamaha 500 Connecting Rod Compatibility

Yamaha two-stroke engines have been produced with different crankshaft and connecting rod configurations.

Although some engines may share similar components, connecting rods are not necessarily interchangeable.

Compatibility depends on factors such as:

– Engine model and displacement
– Crankshaft design
– Connecting rod dimensions
– Big-end bearing dimensions
– Small-end bearing dimensions
– Piston pin specifications
– Crankshaft journal configuration
– Original connecting rod specifications

The **SBT 23-400-124** is listed for compatible Yamaha 500 connecting rod applications.

Always verify the required component specifications before ordering.

## Signs of a Worn or Damaged Connecting Rod

Possible symptoms include:

– Unusual engine knocking
– Metallic tapping or rattling noises
– Excessive engine vibration
– Increased mechanical noise
– Excessive connecting rod movement
– Rough crankshaft rotation
– Bearing wear or damage
– Metal contamination
– Piston or cylinder damage
– Internal engine failure
– Engine seizure

These symptoms can also be caused by other mechanical problems.

A complete engine and crankshaft inspection is recommended before replacing internal components.

## Why Replace Your Yamaha 500 Connecting Rod?

Connecting rods are exposed to repeated mechanical loads during engine operation.

Over time, wear, corrosion, contamination, lubrication problems or internal engine damage may affect the condition of the connecting rod and its associated bearings.

A worn or damaged connecting rod may no longer transfer mechanical loads as intended.

If the problem is not addressed, further damage to the crankshaft, piston and surrounding engine components may occur.

Replacing confirmed worn or damaged connecting rod components is an important part of restoring the mechanical condition of the engine.

The **Yamaha 500 Connecting Rod 23-400-124** provides an SBT replacement option for compatible Yamaha crankshaft repairs.

## Ideal for Yamaha 500 Crankshaft Rebuilding

This replacement connecting rod is intended for:

– Yamaha 500 crankshaft rebuilding
– Connecting rod replacement
– Lower rod bearing replacement
– Wrist-pin bearing replacement
– Piston pin replacement
– Internal engine repairs
– Two-stroke engine restoration
– Personal watercraft engine maintenance
– Replacement of worn or damaged connecting rod components

## Important Installation Information

Connecting rod replacement requires specialised mechanical knowledge and appropriate crankshaft rebuilding equipment.

Before installation:

1. Confirm that SKU 23-400-124 matches the required connecting rod.
2. Verify compatibility with your Yamaha 500 engine.
3. Refer to the appropriate Yamaha service manual.
4. Remove and disassemble the engine as required.
5. Inspect the crankshaft assembly for wear or damage.
6. Inspect the original connecting rod and associated bearings.
7. Compare the replacement components with the original parts.
8. Confirm the correct connecting rod dimensions and specifications.
9. Verify the piston pin and bearing dimensions.
10. Inspect the crankshaft journal and mating surfaces.
11. Confirm the correct washer configuration.
12. Use appropriate crankshaft pressing and rebuilding equipment.
13. Install the connecting rod and associated bearings using the correct procedures.
14. Verify connecting rod side clearance and bearing movement.
15. Check crankshaft alignment and runout against the manufacturer’s specifications.
16. Inspect associated piston and cylinder components.
17. Reassemble the engine according to the manufacturer’s procedures.
18. Confirm correct crankshaft rotation before returning the engine to service.

**Important:** Incorrect connecting rod installation can result in serious internal engine damage.

Crankshaft rebuilding may require specialised pressing, measuring and alignment equipment.

Professional installation by an experienced two-stroke engine rebuilding technician is strongly recommended.

## Important Product Information

**Brand:** SBT
**SKU:** 23-400-124
**Product:** Crankshaft Connecting Rod
**Watercraft Brand:** Yamaha
**Engine Application:** Yamaha 500
**Engine Type:** Two-Stroke
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Included Components:** Connecting Rod, Washers, Piston Pin, Lower Rod Bearing and Wrist-Pin Bearing
**Availability:** PRE ORDER

**Please Note:**

– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Yamaha OEM part.
– Listed for compatible Yamaha 500 engines.
– Exact watercraft models and production years must be verified.
– The supplied description confirms washers, piston pin, lower rod bearing and wrist-pin bearing.
– Exact dimensions and washer quantities have not been specified.
– A complete crankshaft assembly is not included unless separately stated by the supplier.
– Additional crankshaft components may be required.
– Professional crankshaft rebuilding is recommended.

The **Yamaha 500 Connecting Rod 23-400-124** by SBT is a new aftermarket OE replacement crankshaft connecting rod for compatible Yamaha 500 two-stroke engines. Supplied with washers, piston pin, lower rod bearing and wrist-pin bearing, this component is intended for crankshaft rebuilding, engine repairs and replacement of worn or damaged connecting rod components. Available for pre-order.

Weight0.7 kg
Dimensions19 × 10 × 4 cm

1989 YAMAHA
1989 Yamaha Wave Jammer 500
1989 Yamaha Wave Runner 500
1990 YAMAHA
1990 Yamaha Wave Jammer 500
1990 Yamaha Wave Runner 500
1991 YAMAHA
1991 Yamaha Wave Runner 500
1992 YAMAHA
1992 Yamaha VXR 650
1992 Yamaha Wave Runner 500

Shopping Cart
Scroll to Top