Crankshaft Connecting Rod for Polaris 650/750/780 (Short Pin) (PRE ORDER)

$180.00 (inc GST)

Available on back-order

*NOTE* All Pre-Orders & Custom Orders Can Have Up To A 3-4 Week Lead Time

SKU: 23-303-108 Categories: , ,

# PRE ORDER – Polaris 650 / 750 / 780 Crankshaft Connecting Rod Short Pin 23-303-108 – SBT

The **Polaris Connecting Rod 23-303-108** is a new aftermarket OE replacement crankshaft connecting rod assembly kit supplied by **SBT**, designed for compatible Polaris 650, 750 and 780 two-stroke personal watercraft engines.

This connecting rod kit features a **short-pin configuration** and is specifically intended for the **flywheel-side and middle-cylinder positions** of the crankshaft assembly.

Unlike the long-pin connecting rod kit used on the PTO side, the SBT 23-303-108 is designed for the other two connecting rod positions within the compatible Polaris crankshaft assembly.

The kit is supplied complete with a connecting rod, washers, piston pin, lower rod bearing and wrist-pin bearing, providing essential components for connecting rod replacement during crankshaft rebuilding.

The connecting rod links the piston to the crankshaft and transfers the forces generated during combustion. This movement allows the crankshaft to rotate and deliver mechanical power through the engine.

Worn or damaged connecting rod components can cause excessive mechanical movement, unusual engine noises and potentially serious internal engine damage.

For a complete connecting rod rebuild on a compatible Polaris 650, 750 or 780 crankshaft, SBT specifies:

– **2 × SBT 23-303-108** – Flywheel and middle cylinder positions
– **1 × SBT 23-303-109** – PTO-side position

This listing is for **one short-pin connecting rod kit**, not a complete crankshaft rebuild set.

**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.

## Product Details

– **Brand:** SBT
– **SKU:** 23-303-108
– **Product Type:** Crankshaft Connecting Rod Assembly Kit
– **Watercraft Brand:** Polaris
– **Engine Applications:** Polaris 650 / 750 / 780
– **Engine Type:** Two-Stroke
– **Crankshaft Positions:** Flywheel Side and Middle Cylinder
– **Configuration:** Short Pin
– **Replacement Type:** New Aftermarket OE Replacement
– **PTO Connecting Rod Reference:** SBT 23-303-109
– **Quantity Required:** 2 Short-Pin Kits Per Complete Crankshaft Rebuild
– **Application:** Crankshaft Rebuilding
– **Condition:** New
– **Availability:** PRE ORDER

## What’s Included in the Kit?

The **Polaris Connecting Rod 23-303-108** is supplied as a replacement connecting rod assembly kit.

### Kit Includes

– Connecting rod
– Washers
– Piston pin
– Lower rod bearing
– Wrist-pin bearing

These components are intended for use during compatible crankshaft connecting rod repairs and rebuilding.

The lower rod bearing supports movement at the crankshaft end of the connecting rod, while the wrist-pin bearing supports movement at the piston end.

The supplied washers are used as part of the connecting rod assembly arrangement.

**Important:** The supplied product description does not specify the exact washer quantity or separately confirm whether a replacement crankpin is included.

This listing is for one connecting rod kit only.

## Compatible Polaris Engines

The **Polaris Connecting Rod 23-303-108** is listed for compatible Polaris two-stroke personal watercraft engines.

| Polaris Engine | Crankshaft Positions |
|—|—|
| Polaris 650 | Flywheel Side / Middle Cylinder |
| Polaris 750 | Flywheel Side / Middle Cylinder |
| Polaris 780 | Flywheel Side / Middle Cylinder |

**Important:** Exact watercraft models and production years have not been specified.

Compatibility must be confirmed against the original crankshaft assembly before ordering.

Ensure your engine requires the **short-pin connecting rod configuration** corresponding to SBT SKU 23-303-108.

For the PTO-side position, use the long-pin connecting rod kit **23-303-109**.

## Polaris 650 / 750 / 780 Complete Crankshaft Rebuild Requirements

According to the supplied SBT product information, rebuilding the connecting rod assemblies on a compatible Polaris 650, 750 or 780 crankshaft requires three connecting rod kits.

| Crankshaft Position | SBT Part Number | Quantity |
|—|—|—:|
| Flywheel Side | 23-303-108 | 1 |
| Middle Cylinder | 23-303-108 | 1 |
| PTO Side | 23-303-109 | 1 |
| **Total** | | **3 Kits** |

The **23-303-108** kit is the short-pin version used for the flywheel and middle positions.

The **23-303-109** kit is the long-pin version used for the PTO-side position.

**Please Note:** These connecting rod kits are position-specific and should not be interchanged without confirming the crankshaft manufacturer’s specifications.

## Features & Benefits

### New SBT Replacement Connecting Rod

Supplied as a new aftermarket OE replacement connecting rod assembly for compatible Polaris engines.

### Short-Pin Configuration

Specifically listed for the flywheel-side and middle-cylinder connecting rod positions.

### Connecting Rod Assembly Components

Supplied with washers, piston pin, lower rod bearing and wrist-pin bearing.

### Suitable for Crankshaft Rebuilding

Intended for replacing worn or damaged connecting rod assembly components during crankshaft repairs.

### Polaris 650, 750 and 780 Applications

Listed for compatible Polaris 650, 750 and 780 two-stroke personal watercraft engines.

### Two Short-Pin Kits Required

Two SBT 23-303-108 kits are specified for the flywheel and middle positions during a complete crankshaft connecting rod rebuild.

### Pre-Order Availability

Available for pre-order, subject to supplier availability.

## What Does a Crankshaft Connecting Rod Do?

The **Polaris Connecting Rod 23-303-108** connects the piston to the crankshaft.

During engine operation, combustion pressure forces the piston down inside the cylinder.

The connecting rod transfers this force to the crankshaft, converting the piston’s reciprocating movement into rotational motion.

As the crankshaft rotates, the connecting rod continues moving through its operating cycle.

In a two-stroke engine, the connecting rod is subjected to repeated mechanical loads and high-speed movement.

Correct connecting rod condition and installation are important for reliable engine operation.

A worn or damaged connecting rod assembly may affect piston movement, crankshaft rotation and overall engine reliability.

## What Is the Difference Between 23-303-108 and 23-303-109?

The Polaris 650, 750 and 780 crankshaft assemblies require different connecting rod kit configurations depending on the cylinder position.

### SBT 23-303-108 – Short Pin

This kit is specified for:

– Flywheel-side connecting rod position
– Middle-cylinder connecting rod position

Two kits are required for a complete crankshaft connecting rod rebuild.

### SBT 23-303-109 – Long Pin

This kit is specified for:

– PTO-side connecting rod position

One kit is required for a complete crankshaft connecting rod rebuild.

The primary distinction is the **short-pin versus long-pin configuration** and the intended crankshaft position.

**Important:** This listing is for the short-pin 23-303-108 kit only. The PTO-side 23-303-109 kit is sold separately.

## Why Is the Short-Pin Configuration Important?

The Polaris 650, 750 and 780 crankshaft assemblies use position-specific connecting rod configurations.

The flywheel-side and middle-cylinder positions require the short-pin connecting rod kit identified by SBT part number 23-303-108.

The correct pin configuration is important for maintaining the intended crankshaft assembly arrangement.

Incorrect component selection or installation can affect connecting rod movement, crankshaft alignment and engine reliability.

Always verify the crankshaft position and required components before assembly.

## Why Are Connecting Rod Bearings Important?

Connecting rod bearings allow the connecting rod to move relative to the crankshaft and piston wrist pin.

They help:

– Support connecting rod movement
– Manage mechanical loads
– Reduce friction between moving components
– Maintain the intended connecting rod arrangement
– Support smooth engine operation

The SBT 23-303-108 kit includes a lower rod bearing and wrist-pin bearing.

Correct bearing selection, lubrication and installation are essential for reliable engine operation.

## Signs of a Worn or Damaged Connecting Rod Assembly

Possible symptoms include:

– Unusual engine knocking
– Rattling or grinding noises
– Excessive engine vibration
– Worn connecting rod bearings
– Excessive connecting rod movement
– Rough crankshaft rotation
– Damaged crankshaft components
– Metal particles inside the engine
– Internal engine damage
– Engine seizure

These symptoms can also result from other mechanical problems.

A complete crankshaft inspection is recommended before replacing internal engine components.

## Why Replace Your Polaris Connecting Rod?

Connecting rods and their bearings operate under significant mechanical loads during engine operation.

Over time, wear, corrosion, contamination or lubrication problems may damage the connecting rod assembly.

A worn lower rod bearing or damaged connecting rod may affect crankshaft rotation and piston movement.

If the problem is not addressed, further internal engine damage may occur.

Replacing confirmed worn or damaged connecting rod components is an important part of restoring the mechanical condition of the crankshaft.

The **Polaris Connecting Rod 23-303-108** provides an SBT replacement option for compatible Polaris 650, 750 and 780 flywheel and middle-cylinder crankshaft applications.

## Ideal for Polaris Crankshaft Rebuilding

This replacement connecting rod kit is intended for:

– Polaris 650 crankshaft rebuilding
– Polaris 750 crankshaft repairs
– Polaris 780 crankshaft rebuilding
– Flywheel-side connecting rod replacement
– Middle-cylinder connecting rod replacement
– Lower rod bearing replacement
– Wrist-pin bearing replacement
– Internal engine maintenance
– Two-stroke engine restoration
– Personal watercraft engine repairs

## Important Installation Information

Crankshaft connecting rod replacement requires specialised mechanical knowledge and appropriate equipment.

Before installation:

1. Confirm that SKU 23-303-108 matches the required connecting rod kit.
2. Verify that the kit is being installed in the flywheel or middle-cylinder position.
3. Use SBT 23-303-109 for the PTO-side position.
4. Refer to the appropriate Polaris service manual and SBT technical instructions.
5. Remove and disassemble the engine as required.
6. Inspect the crankshaft assembly for damage.
7. Check the original connecting rod, bearings and associated pins.
8. Compare the replacement components with the original parts.
9. Confirm the correct short-pin configuration.
10. Verify that all required crankshaft rebuilding components are available.
11. Use appropriate crankshaft pressing and assembly equipment.
12. Install the connecting rod and bearings according to the manufacturer’s procedures.
13. Check connecting rod side clearance and crankshaft alignment.
14. Confirm crankshaft runout is within the manufacturer’s specifications.
15. Reassemble the engine using the correct procedures.
16. Verify smooth crankshaft movement before returning the engine to service.

**Important:** Crankshaft rebuilding requires specialised pressing, measuring and alignment equipment.

Incorrect crankshaft assembly can result in serious internal engine damage.

Professional installation by an experienced two-stroke engine rebuilding technician is strongly recommended.

## Important Product Information

**Brand:** SBT
**SKU:** 23-303-108
**Product:** Crankshaft Connecting Rod Assembly Kit – Short Pin
**Watercraft Brand:** Polaris
**Engine Applications:** 650 / 750 / 780
**Crankshaft Positions:** Flywheel Side / Middle Cylinder
**Configuration:** Short Pin
**PTO Rod Kit:** 23-303-109 (Sold Separately)
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Availability:** PRE ORDER

**Kit Includes:**
– Connecting Rod
– Washers
– Piston Pin
– Lower Rod Bearing
– Wrist-Pin Bearing

**Please Note:**

– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This listing is for one SBT 23-303-108 short-pin connecting rod assembly kit.
– Two 23-303-108 kits are required for the flywheel and middle-cylinder positions of a complete crankshaft connecting rod rebuild.
– One additional 23-303-109 long-pin kit is required for the PTO-side position.
– The 23-303-109 kit is not included.
– Exact watercraft models and production years must be verified.
– Additional crankshaft components may be required.
– Professional crankshaft rebuilding is recommended.

The **Polaris Connecting Rod 23-303-108** by SBT is a new aftermarket OE replacement short-pin connecting rod assembly kit for compatible Polaris 650, 750 and 780 crankshafts. Designed for the flywheel-side and middle-cylinder positions, this kit includes washers, piston pin, lower rod bearing and wrist-pin bearing and is available for pre-order.

Weight0.7 kg
Dimensions19 × 10 × 4 cm

1992 POLARIS
1992 Polaris SL650
1993 POLARIS
1993 Polaris SL650
1993 Polaris SL750
1994 POLARIS
1994 Polaris SL650
1994 Polaris SL750
1994 Polaris SLT750
1995 POLARIS
1995 Polaris SL650
1995 Polaris SL750
1995 Polaris SLT750
1995 Polaris SLX780
1996 POLARIS
1996 Polaris SL780
1996 Polaris SLT780
1996 Polaris SLX780
1997 POLARIS
1997 Polaris SL780
1997 Polaris SLT780

Shopping Cart
Scroll to Top