# PRE ORDER – Sea-Doo 787 Crankshaft Connecting Rod 23-107-113 – SBT
The **Sea-Doo Connecting Rod 23-107-113** is a new aftermarket OE replacement crankshaft connecting rod supplied by **SBT**, listed for compatible Sea-Doo 787 two-stroke personal watercraft and jet boat engines.
This replacement connecting rod is advertised for a range of Sea-Doo applications, including **GSX, GTX, XP, SPX, Challenger/1800, GSX RFI, GTX RFI and 3D RFI** models equipped with compatible engine configurations.
The connecting rod is supplied complete with **washers, a piston pin, a lower rod bearing and a wrist-pin bearing**, providing essential components for compatible crankshaft rebuilding and connecting rod replacement applications.
The connecting rod is an important internal engine component responsible for transferring mechanical movement between the piston and crankshaft.
During engine operation, the connecting rod experiences repeated mechanical loads as the piston moves up and down inside the cylinder.
In Sea-Doo two-stroke engines, connecting rods must withstand rapid changes in direction, high rotational speeds and significant combustion forces.
Over time, connecting rods and their associated bearings may become worn or damaged due to mechanical stress, corrosion, contamination, lubrication problems or internal engine failure.
A worn or damaged connecting rod assembly may contribute to unusual engine knocking, excessive vibration, abnormal crankshaft movement and potentially serious internal engine damage.
The **SBT 23-107-113** provides a replacement option for compatible Sea-Doo 787 crankshaft assemblies requiring this connecting rod and associated components.
**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.
## Product Details
– **Brand:** SBT
– **SKU:** 23-107-113
– **Product Type:** Crankshaft Connecting Rod
– **Watercraft Brand:** Sea-Doo
– **Engine Application:** Sea-Doo 787
– **Model Families Listed:** GSX / GTX / XP / SPX / Challenger / 1800 / GSX RFI / GTX RFI / 3D RFI
– **Engine Type:** Two-Stroke
– **Replacement Type:** New Aftermarket OE Replacement
– **Application:** Connecting Rod Replacement and Crankshaft Rebuilding
– **Condition:** New
– **Availability:** PRE ORDER
## What’s Included?
The **Sea-Doo Connecting Rod 23-107-113** is supplied with:
– Connecting rod
– Washers
– Piston pin
– Lower rod bearing
– Wrist-pin bearing
These components are included according to the supplied product description.
**Important:** The exact number of washers, component dimensions and any additional hardware have not been specified.
This product is a replacement connecting rod assembly, not a complete crankshaft.
## Compatible Sea-Doo Models
The **Sea-Doo Connecting Rod 23-107-113** is listed for the following Sea-Doo model families.
| Sea-Doo Model | Engine Application |
|—|—|
| Sea-Doo GSX | 787 |
| Sea-Doo GTX | 787 |
| Sea-Doo XP | 787 |
| Sea-Doo SPX | 787 |
| Sea-Doo Challenger | Compatible 787 configuration |
| Sea-Doo Challenger 1800 | Compatible 787 configuration |
| Sea-Doo GSX RFI | 787 RFI |
| Sea-Doo GTX RFI | 787 RFI |
| Sea-Doo 3D RFI | 787 RFI |
**Important:** These applications are taken from the supplied product title. The technical description does not independently list model-specific fitment.
Exact model years and engine configurations must be verified before purchase.
The Challenger and Challenger 1800 applications may involve different engine arrangements, so the required connecting rod must be confirmed against the original engine and crankshaft specifications.
Always verify that **SBT part number 23-107-113** matches your specific Sea-Doo crankshaft assembly.
## Features & Benefits
### New SBT Replacement Connecting Rod
Supplied as a new aftermarket OE replacement connecting rod for compatible Sea-Doo 787 crankshaft applications.
### Includes Essential Components
Supplied with washers, piston pin, lower rod bearing and wrist-pin bearing.
### Suitable for Crankshaft Rebuilding
Intended for connecting rod replacement during compatible crankshaft rebuilding and engine repair applications.
### Supports Piston-to-Crankshaft Movement
Transfers mechanical movement between the piston and crankshaft during engine operation.
### Sea-Doo 787 Engine Application
Listed for compatible Sea-Doo 787 two-stroke engine configurations.
### Multiple Sea-Doo Model Applications
Advertised for GSX, GTX, XP, SPX, Challenger, Challenger 1800 and selected RFI model families, subject to fitment verification.
### Pre-Order Availability
Available for pre-order, subject to supplier availability.
## What Does a Crankshaft Connecting Rod Do?
The **Sea-Doo Connecting Rod 23-107-113** is designed to connect the piston assembly to the crankshaft.
During engine operation, combustion forces push the piston downward inside the cylinder.
The connecting rod transfers this movement to the crankshaft, helping convert the piston’s reciprocating motion into rotational motion.
As the crankshaft rotates, the connecting rod also guides the piston through its repeated upward and downward movement.
Connecting rods experience significant mechanical loads and must maintain their intended alignment and bearing clearances.
Correct connecting rod condition, bearing fitment and installation are important for reliable engine operation.
## Understanding the Connecting Rod Assembly
A connecting rod assembly contains several components that work together to transfer mechanical movement.
### Connecting Rod
The main component connecting the piston to the crankshaft.
### Piston Pin
The pin used to connect the piston and connecting rod at the small end.
### Lower Rod Bearing
The bearing located at the connecting rod’s larger crankshaft end.
### Wrist-Pin Bearing
The bearing used at the connecting rod’s smaller piston end.
### Washers
Components used to establish the required spacing and side-clearance arrangement in applicable crankshaft designs.
The **SBT 23-107-113** includes these components as described in the supplied product information.
## What Is a Lower Rod Bearing?
The lower rod bearing, also known as the big-end bearing, is positioned at the crankshaft end of the connecting rod.
This bearing allows relative movement between the connecting rod and crankshaft journal during engine operation.
It experiences repeated mechanical loads as combustion forces are transferred through the connecting rod.
A worn or damaged lower rod bearing may cause excessive play, mechanical noise or damage to the crankshaft assembly.
The **Sea-Doo Connecting Rod 23-107-113** includes a lower rod bearing for the specified replacement application.
## What Is a Wrist-Pin Bearing?
The wrist-pin bearing is located at the small end of the connecting rod, where the rod connects to the piston through the piston pin.
This bearing allows the connecting rod to pivot relative to the piston during engine operation.
It experiences repeated movement as the piston travels through the cylinder.
A worn wrist-pin bearing may contribute to excessive movement, mechanical noise and damage to the piston or connecting rod assembly.
The **SBT 23-107-113** includes a wrist-pin bearing as part of the supplied components.
## Why Are Connecting Rod Washers Important?
Connecting rod washers are used in certain crankshaft designs to help maintain the intended spacing and side-clearance arrangement of the connecting rod.
Correct washer selection and installation are important during crankshaft rebuilding.
Incorrect components or improper assembly may affect connecting rod movement and crankshaft operation.
The **Sea-Doo Connecting Rod 23-107-113** is supplied with washers according to the product description.
Always confirm the correct washer quantity, position and installation requirements using the appropriate service information.
## Understanding Sea-Doo 787 Connecting Rod Compatibility
Sea-Doo 787 engines have been used across different personal watercraft and jet boat applications.
Although some engines may share similar components, connecting rods are not necessarily interchangeable across every engine configuration.
Compatibility depends on factors such as:
– Engine model and displacement
– Carburetted or RFI engine configuration
– Crankshaft design
– Connecting rod dimensions
– Big-end bearing dimensions
– Small-end bearing dimensions
– Piston pin specifications
– Crankshaft journal configuration
– Original connecting rod specifications
The **SBT 23-107-113** is listed for compatible Sea-Doo 787 connecting rod applications.
Always verify the required component specifications before ordering.
## Carburetted vs RFI Sea-Doo 787 Engines
Sea-Doo produced 787 engine applications with different fuel delivery systems.
### Carburetted Engines
Carburetted versions use carburettors to supply the air-fuel mixture.
### RFI Engines
RFI stands for Rotax Fuel Injection and refers to the fuel-injected configuration used in certain Sea-Doo two-stroke engines.
Although the fuel delivery systems differ, the correct connecting rod must still be identified using the engine and crankshaft specifications.
The product title includes both conventional Sea-Doo model families and RFI applications.
Do not assume every 787 crankshaft configuration uses the same connecting rod without confirming compatibility.
## Signs of a Worn or Damaged Connecting Rod
Possible symptoms include:
– Unusual engine knocking
– Metallic tapping or rattling noises
– Excessive engine vibration
– Increased mechanical noise
– Excessive connecting rod movement
– Rough crankshaft rotation
– Bearing wear or damage
– Metal contamination
– Piston or cylinder damage
– Internal engine failure
– Engine seizure
These symptoms can also be caused by other mechanical problems.
A complete engine and crankshaft inspection is recommended before replacing internal components.
## Why Replace Your Sea-Doo Connecting Rod?
Connecting rods are exposed to repeated mechanical loads during engine operation.
Over time, wear, corrosion, contamination, lubrication problems or internal engine damage may affect the condition of the connecting rod and its associated bearings.
A worn or damaged connecting rod may no longer transfer mechanical loads as intended.
If the problem is not addressed, further damage to the crankshaft, piston and surrounding engine components may occur.
Replacing confirmed worn or damaged connecting rod components is an important part of restoring the mechanical condition of the engine.
The **Sea-Doo Connecting Rod 23-107-113** provides an SBT replacement option for compatible Sea-Doo crankshaft repairs.
## Ideal for Sea-Doo 787 Crankshaft Rebuilding
This replacement connecting rod is intended for:
– Sea-Doo 787 crankshaft rebuilding
– Compatible GSX and GTX engine repairs
– Compatible XP and SPX engine repairs
– Compatible Challenger engine rebuilding
– Compatible GSX RFI and GTX RFI repairs
– Compatible 3D RFI engine repairs
– Connecting rod replacement
– Lower rod bearing replacement
– Wrist-pin bearing replacement
– Piston pin replacement
– Internal engine repairs
– Two-stroke engine restoration
– Replacement of worn or damaged connecting rod components
## Important Installation Information
Connecting rod replacement requires specialised mechanical knowledge and appropriate crankshaft rebuilding equipment.
Before installation:
1. Confirm that SKU 23-107-113 matches the required connecting rod.
2. Verify compatibility with your specific Sea-Doo 787 engine.
3. Confirm the correct crankshaft configuration.
4. Refer to the appropriate Sea-Doo service manual.
5. Remove and disassemble the engine as required.
6. Inspect the crankshaft assembly for wear or damage.
7. Inspect the original connecting rod and associated bearings.
8. Compare the replacement components with the original parts.
9. Confirm the correct connecting rod dimensions and specifications.
10. Verify the piston pin and bearing dimensions.
11. Inspect the crankshaft journal and mating surfaces.
12. Confirm the correct washer configuration.
13. Use appropriate crankshaft pressing and rebuilding equipment.
14. Install the connecting rod and associated bearings using the correct procedures.
15. Verify connecting rod side clearance and bearing movement.
16. Check crankshaft alignment and runout against the manufacturer’s specifications.
17. Inspect associated piston and cylinder components.
18. Reassemble the engine according to the manufacturer’s procedures.
19. Confirm correct crankshaft rotation before returning the engine to service.
**Important:** Incorrect connecting rod installation can result in serious internal engine damage.
Crankshaft rebuilding may require specialised pressing, measuring and alignment equipment.
Professional installation by an experienced Sea-Doo two-stroke engine rebuilding technician is strongly recommended.
## Important Product Information
**Brand:** SBT
**SKU:** 23-107-113
**Product:** Crankshaft Connecting Rod
**Watercraft Brand:** Sea-Doo
**Engine Application:** Sea-Doo 787
**Model Families Listed:** GSX / GTX / XP / SPX / Challenger / Challenger 1800 / GSX RFI / GTX RFI / 3D RFI
**Engine Type:** Two-Stroke
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Included Components:** Connecting Rod, Washers, Piston Pin, Lower Rod Bearing and Wrist-Pin Bearing
**Availability:** PRE ORDER
**Please Note:**
– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Sea-Doo OEM part.
– Model applications are taken from the supplied product title.
– Exact model years and individual engine configurations must be verified.
– Confirm compatibility with the original Sea-Doo 787 crankshaft assembly.
– The supplied description confirms washers, piston pin, lower rod bearing and wrist-pin bearing.
– Exact dimensions and washer quantities have not been specified.
– This is not a complete crankshaft assembly.
– Additional crankshaft components may be required.
– Professional crankshaft rebuilding is recommended.
The **Sea-Doo Connecting Rod 23-107-113** by SBT is a new aftermarket OE replacement crankshaft connecting rod listed for compatible Sea-Doo 787 two-stroke engines. Supplied with washers, piston pin, lower rod bearing and wrist-pin bearing, this component is intended for crankshaft rebuilding, engine repairs and replacement of worn or damaged connecting rod components. Available for pre-order.





