Crankshaft Flywheel Inner and Center Bearing for Sea-Doo 717 787 (PRE ORDER)

$35.00 (inc GST)

Available on back-order

*NOTE* All Pre-Orders & Custom Orders Can Have Up To A 3-4 Week Lead Time

SKU: 23-105-216 Categories: , ,

# PRE ORDER – Sea-Doo 717/787 Crankshaft Flywheel Inner and Center C3 Bearing 23-105-216 – SBT

The **Sea-Doo Crankshaft Bearing 23-105-216** is a new aftermarket OE replacement bearing supplied by **SBT**, listed for compatible Sea-Doo 717 and 787 two-stroke personal watercraft engines.

This replacement bearing is identified as a **C3 flywheel inner and center crankshaft bearing**, with the technical description also specifying the **6207 bearing designation**.

The supplied technical description references Sea-Doo 717 and 800 engines, while the product title lists Sea-Doo 717 and 787. These engine designations should be checked against the supplier’s fitment information before purchase.

Crankshaft bearings are essential internal engine components that support the crankshaft as it rotates during operation.

The crankshaft converts the pistons’ reciprocating movement into rotational motion, transferring power through the engine’s driveline system.

During engine operation, crankshaft bearings experience repeated mechanical loads, rotational movement and changes in operating temperature.

Over time, crankshaft bearings may become worn or damaged due to mechanical stress, corrosion, contamination, lubrication-related problems or internal engine failure.

A worn or damaged crankshaft bearing may contribute to unusual engine noises, excessive vibration, rough crankshaft rotation or damage to surrounding engine components.

The **SBT 23-105-216** provides a replacement option for compatible Sea-Doo crankshaft assemblies requiring the specified C3 6207 bearing configuration.

**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.

## Product Details

– **Brand:** SBT
– **SKU:** 23-105-216
– **Product Type:** Crankshaft Bearing
– **Watercraft Brand:** Sea-Doo
– **Engine Applications in Product Title:** Sea-Doo 717 / 787
– **Engine Applications in Technical Description:** Sea-Doo 717 / 800
– **Engine Type:** Two-Stroke
– **Bearing Designation:** 6207
– **Internal Clearance:** C3
– **Bearing Positions Listed:** Flywheel Inner / Center
– **Replacement Type:** New Aftermarket OE Replacement
– **Application:** Crankshaft Bearing Replacement and Engine Rebuilding
– **Condition:** New
– **Availability:** PRE ORDER

## Compatible Sea-Doo Engines

The **Sea-Doo Crankshaft Bearing 23-105-216** is advertised for the following engine applications.

| Sea-Doo Engine | Listing Reference | Bearing Application |
|—|—|—|
| Sea-Doo 717 | Product title and technical description | C3 Flywheel Inner / Center |
| Sea-Doo 787 | Product title | C3 Flywheel Inner / Center |
| Sea-Doo 800 | Technical description | C3 Flywheel Inner / Center |

**Important:** The supplied product information does not provide individual watercraft models, production years or a complete crankshaft bearing position diagram.

The 787 and 800 designations may be used in related Sea-Doo engine descriptions, but the exact application should be verified using the original crankshaft specifications and SBT fitment information.

Always confirm that **SBT part number 23-105-216** matches the bearing required for your engine and crankshaft position.

## Features & Benefits

### New SBT Replacement Bearing

Supplied as a new aftermarket OE replacement crankshaft bearing for compatible Sea-Doo engine applications.

### C3 Internal Clearance

Features a C3 internal clearance classification for applications requiring greater-than-normal bearing clearance.

### 6207 Bearing Designation

The supplied technical description identifies the bearing as a 6207 type.

### Flywheel Inner and Center Applications

Listed for flywheel inner and center crankshaft bearing positions, subject to confirmation of the specific engine configuration.

### Supports Crankshaft Rotation

Helps support the crankshaft and maintain its intended alignment during engine operation.

### Suitable for Engine Rebuilding

Intended for replacement of worn or damaged crankshaft bearings during compatible engine repairs and rebuilding.

### Pre-Order Availability

Available for pre-order, subject to supplier availability.

## What Does a Crankshaft Bearing Do?

The **Sea-Doo Crankshaft Bearing 23-105-216** is designed to support the crankshaft as it rotates inside the engine.

The crankshaft is responsible for converting piston movement into rotational motion.

Crankshaft bearings help support the crankshaft at its designated positions while allowing rotational movement.

Correct bearing condition and installation are important for maintaining the intended crankshaft alignment and operation.

A worn or damaged bearing may allow excessive movement, increase mechanical friction or contribute to damage to surrounding crankshaft components.

Replacing damaged bearings is an important part of maintaining the mechanical condition of a rebuilt crankshaft assembly.

## Understanding Crankshaft Bearing Positions

Sea-Doo two-stroke crankshaft assemblies may use multiple bearings positioned along the crankshaft.

Each bearing supports the crankshaft at a designated location.

### Flywheel-Side Bearings

These bearings are positioned toward the flywheel or magneto side of the crankshaft.

### Center Bearings

Center bearings support the crankshaft within the central portion of the crankshaft assembly.

### PTO-Side Bearings

PTO-side bearings are positioned toward the power take-off end of the crankshaft.

The **SBT 23-105-216** is specifically listed for flywheel inner and center bearing applications.

However, the supplied description does not confirm whether the same bearing is interchangeable between both positions on every listed engine.

Always verify the required bearing position before ordering.

## What Does C3 Mean in a Crankshaft Bearing?

The **C3 classification** refers to the internal clearance of a rolling-element bearing.

C3 bearings have greater internal clearance than bearings with normal clearance classification.

This additional clearance may be required where operating temperatures, shaft fits or housing fits affect bearing clearance during use.

### Why Correct Internal Clearance Matters

– Helps maintain the intended bearing operating clearance
– Accounts for changes caused by installation fits
– Accommodates thermal changes during engine operation
– Supports correct bearing function when installed to specification
– Matches applications designed to use C3 bearings

**Important:** C3 does not automatically mean that a bearing is stronger or suitable for every engine.

A replacement bearing must match the original manufacturer’s required specifications.

The **SBT 23-105-216** is specifically identified as a C3 bearing.

## What Does 6207 Mean?

The technical description identifies this replacement component as a **6207 bearing**.

The 6207 designation belongs to a standard bearing numbering system and generally identifies a particular bearing series and bore-size classification.

A standard 6207 deep-groove ball bearing typically has nominal dimensions of:

– **Inside Diameter:** 35 mm
– **Outside Diameter:** 72 mm
– **Width:** 17 mm

These are standard nominal 6207 dimensions, not independently verified measurements of SBT part number 23-105-216.

Engine-specific bearings may have additional features or specifications, such as locating arrangements, lubrication provisions or other design differences.

**Important:** Do not assume that any generic 6207 C3 bearing can replace this Sea-Doo crankshaft bearing.

Always verify the exact dimensions, locating features and engine-specific specifications before installation.

## Why Crankshaft Bearing Compatibility Matters

Although some Sea-Doo engines may share similar crankshaft bearing dimensions, individual bearings are not necessarily interchangeable.

Compatibility depends on factors such as:

– Engine model
– Crankshaft design
– Bearing position
– Bearing dimensions
– Internal clearance classification
– Locating features
– Shaft and housing fit
– Lubrication requirements
– Original bearing specifications

The **SBT 23-105-216** is identified as a C3 6207 flywheel inner and center crankshaft bearing.

Confirm the correct application before purchasing.

## Signs of a Worn or Damaged Crankshaft Bearing

Possible symptoms include:

– Unusual engine knocking
– Grinding or rattling noises
– Increased mechanical vibration
– Rough crankshaft rotation
– Excessive crankshaft movement
– Bearing corrosion
– Visible bearing damage
– Metal contamination
– Internal engine noise
– Damage to surrounding crankshaft components
– Engine seizure in severe cases

These symptoms can also be caused by other mechanical problems.

A complete inspection of the crankshaft assembly and related engine components is recommended before replacing the bearing.

## Why Replace Your Sea-Doo Crankshaft Bearing?

Crankshaft bearings are exposed to repeated mechanical loads during engine operation.

Over time, wear, corrosion, contamination or lubrication problems may affect bearing condition.

A worn bearing may no longer support the crankshaft as intended.

If the problem is not addressed, further damage to the crankshaft and surrounding engine components may occur.

Replacing confirmed worn or damaged crankshaft bearings is an important part of restoring the mechanical condition of the engine.

The **Sea-Doo Crankshaft Bearing 23-105-216** provides an SBT replacement option for compatible Sea-Doo crankshaft repairs.

## Ideal for Sea-Doo Crankshaft Rebuilding

This replacement bearing is intended for:

– Sea-Doo 717 crankshaft rebuilding
– Compatible Sea-Doo 787 engine repairs
– Compatible Sea-Doo 800 engine applications
– Flywheel inner bearing replacement
– Center crankshaft bearing replacement
– C3 bearing replacement
– 6207 bearing replacement where the complete specification matches
– Internal engine repairs
– Two-stroke engine restoration
– Personal watercraft engine maintenance

## Important Installation Information

Crankshaft bearing replacement requires appropriate mechanical knowledge and specialised equipment.

Before installation:

1. Confirm that SKU 23-105-216 matches the required crankshaft bearing.
2. Verify compatibility with your specific Sea-Doo engine.
3. Confirm the correct flywheel inner or center bearing position.
4. Verify that the 6207 designation matches the original bearing.
5. Confirm that C3 internal clearance is required.
6. Refer to the appropriate Sea-Doo service manual.
7. Remove and disassemble the required engine components.
8. Inspect the crankshaft assembly for wear or damage.
9. Check the condition of the original bearing and surrounding components.
10. Compare the replacement bearing with the original part.
11. Confirm the correct bearing dimensions and specifications.
12. Inspect the shaft and bearing seating surfaces.
13. Use appropriate bearing removal and installation equipment.
14. Install the replacement bearing using the correct procedures.
15. Avoid applying installation force through the rolling elements.
16. Verify correct bearing seating and crankshaft alignment.
17. Check crankshaft runout against the manufacturer’s specifications.
18. Inspect associated seals and crankshaft components.
19. Reassemble the engine according to the manufacturer’s procedures.
20. Confirm correct crankshaft rotation before returning the engine to service.

**Important:** Incorrect crankshaft bearing installation can result in serious internal engine damage.

Crankshaft rebuilding may require specialised pressing, measuring and alignment equipment.

Professional installation by an experienced Sea-Doo two-stroke engine rebuilding technician is strongly recommended.

## Important Product Information

**Brand:** SBT
**SKU:** 23-105-216
**Product:** Crankshaft Flywheel Inner and Center Bearing
**Watercraft Brand:** Sea-Doo
**Engine Applications Listed:** 717 / 787 / 800
**Bearing Designation:** 6207
**Internal Clearance:** C3
**Bearing Positions Listed:** Flywheel Inner / Center
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Availability:** PRE ORDER

**Please Note:**

– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Sea-Doo OEM part.
– The product title lists Sea-Doo 717 and 787.
– The technical description lists Sea-Doo 717 and 800.
– Exact model years and watercraft applications have not been provided.
– Confirm the correct flywheel inner or center bearing position before ordering.
– Confirm that C3 internal clearance is required.
– The technical description identifies the bearing as 6207.
– Standard 6207 dimensions should not be treated as verified SBT-specific measurements.
– Locating features and other engine-specific specifications have not been provided.
– The number of bearings supplied has not been specified.
– Additional seals or crankshaft components may be required.
– Professional crankshaft rebuilding is recommended.

The **Sea-Doo Crankshaft Bearing 23-105-216** by SBT is a new aftermarket OE replacement C3 6207 crankshaft bearing listed for compatible Sea-Doo flywheel inner and center bearing applications. Designed for crankshaft rebuilding, engine repairs and replacement of worn or damaged bearings, this component is available for pre-order.

Weight0.35 kg
Dimensions12 × 10 × 2 cm

1995 SEA-DOO
1995 Sea-Doo HX
1995 Sea-Doo XP
1995 Sea-Doo XP800
1996 SEA-DOO
1996 Sea-Doo Challenger
1996 Sea-Doo GTI
1996 Sea-Doo GTS
1996 Sea-Doo GTX
1996 Sea-Doo HX
1996 Sea-Doo SPX
1996 Sea-Doo XP
1997 SEA-DOO
1997 Sea-Doo Challenger
1997 Sea-Doo Challenger 1800
1997 Sea-Doo GS
1997 Sea-Doo GSI
1997 Sea-Doo GTI
1997 Sea-Doo GTS
1997 Sea-Doo GTX
1997 Sea-Doo HX
1997 Sea-Doo SPX
1997 Sea-Doo XP
1997 Sea-Doo SP
1998 SEA-DOO
1998 Sea-Doo Challenger
1998 Sea-Doo GS
1998 Sea-Doo GTI
1998 Sea-Doo GTS
1998 Sea-Doo SPX
1999 SEA-DOO
1999 Sea-Doo Challenger 1800
1999 Sea-Doo GS
1999 Sea-Doo SPX
1999 Sea-Doo GTI
1999 Sea-Doo GTS
2000 SEA-DOO
2000 Sea-Doo GS
2001 SEA-DOO
2001 Sea-Doo GS
2001 Sea-Doo GTI
2001 Sea-Doo GTS
2003 SEA-DOO
2003 Sea-Doo GTI
2004 SEA-DOO
2004 Sea-Doo GTI
2005 SEA-DOO
2005 Sea-Doo GTI

Shopping Cart
Scroll to Top