# Sea-Doo Crankshaft End Seal Kit – 587 / 657 / 657X / 717 / 720 – SBT 21-101
Protect your Sea-Doo engine from damaging crankcase air leaks with the **SBT Sea-Doo Crankshaft End Seal Kit 21-101**, a high-quality replacement seal kit designed for selected Sea-Doo two-stroke engines.
Suitable for compatible **Sea-Doo 587, 657, 657X, 717 and 720 engines**, this crankshaft end seal kit is listed for a range of Sea-Doo personal watercraft, including the **SP, GT, SPI, XP, GTS, GTX, SPX, HX and GTI**.
Manufactured using durable rubber and steel components, the **SBT 21-101 Crankshaft End Seal Kit** is designed to withstand the heat, pressure, oil exposure and demanding operating conditions found inside personal watercraft engines.
Crankshaft seals play an essential role in maintaining crankcase sealing and preventing unwanted air from entering a two-stroke engine.
A leaking crankshaft seal can affect engine performance, alter the air-fuel mixture and potentially contribute to serious engine damage.
Whether you’re rebuilding a Sea-Doo engine, installing a replacement crankshaft or repairing a crankcase air leak, the **SBT Sea-Doo Crankshaft End Seal Kit 21-101** provides the replacement end seals required for compatible applications.
**Important:** This kit contains crankshaft end seals only. Centre crankshaft seals are not included.
## Product Details
– **Brand:** SBT
– **SKU / Part Number:** 21-101
– **Product Type:** Crankshaft End Seal Kit
– **Compatible Make:** Sea-Doo
– **Engine Applications:** 587, 657, 657X, 717 and 720
– **Listed Models:** SP, GT, SPI, XP, GTS, GTX, SPX, HX and GTI
– **Engine Type:** Two-Stroke
– **Seal Construction:** High-Quality Rubber and Steel Components
– **Application:** Crankshaft Installation and Engine Rebuilding
– **Primary Function:** Crankcase Sealing and Air Leak Prevention
– **Centre Crankshaft Seals:** Not Included
– **Replacement Type:** New Aftermarket Seal Kit
## Compatible Sea-Doo Models
The **SBT Sea-Doo Crankshaft End Seal Kit 21-101** is listed for selected applications within the following Sea-Doo model families:
| Sea-Doo Model | Listed Application |
|—|—|
| Sea-Doo SP | Selected Compatible Engines |
| Sea-Doo GT | Selected Compatible Engines |
| Sea-Doo SPI | Selected Compatible Engines |
| Sea-Doo XP | Selected Compatible Engines |
| Sea-Doo GTS | Selected Compatible Engines |
| Sea-Doo GTX | Selected Compatible Engines |
| Sea-Doo SPX | Selected Compatible Engines |
| Sea-Doo HX | Selected Compatible Engines |
| Sea-Doo GTI | Selected Compatible Engines |
### Compatible Engine Types
– Sea-Doo 587
– Sea-Doo 657
– Sea-Doo 657X
– Sea-Doo 717
– Sea-Doo 720
**Compatibility Note:** Exact production years have not been supplied.
Not every Sea-Doo model listed above uses the same engine or crankshaft seal configuration.
Always confirm the engine type and crankshaft seal specifications before ordering.
## Features & Benefits
### Helps Prevent Crankcase Air Leaks
The **SBT Sea-Doo Crankshaft End Seal Kit 21-101** is designed to help maintain proper crankcase sealing.
A crankcase air leak can allow unwanted air into a two-stroke engine, affecting the intended air-fuel mixture.
This may lead to poor running conditions, excessive heat or engine damage.
Replacing worn crankshaft end seals helps restore the intended sealing arrangement when the surrounding engine components are in good condition.
### Durable Rubber and Steel Construction
SBT manufactures its crankshaft end seals using high-quality rubber and steel components.
These materials are selected to withstand demanding engine operating conditions, including:
– Heat
– Pressure
– Oil exposure
– Engine vibration
– Repeated operating cycles
The durable construction makes the seals suitable for compatible Sea-Doo engine rebuilding and repair applications.
### Designed for Crankshaft Installation
The **SBT 21-101 Crankshaft End Seal Kit** is intended for use when installing a crankshaft into a compatible Sea-Doo crankcase.
Replacing the crankshaft end seals during engine assembly helps ensure the sealing components are in suitable condition before the engine is returned to service.
### Suitable for Multiple Sea-Doo Engines
The kit is listed for selected Sea-Doo 587, 657, 657X, 717 and 720 engine applications.
These engines were used across several Sea-Doo personal watercraft models.
Always verify the engine configuration before purchasing.
### Engine Rebuild and Maintenance Application
The **SBT Sea-Doo Crankshaft End Seal Kit 21-101** is suitable for compatible engine repairs and crankshaft servicing.
It provides replacement sealing components for engines where the original crankshaft end seals have deteriorated or become damaged.
## What Are Crankshaft End Seals?
Crankshaft end seals are sealing components installed at the ends of the crankshaft where it passes through the crankcase.
Their purpose is to help maintain the required separation between the crankcase interior and the surrounding environment.
In a two-stroke engine, crankcase sealing is particularly important because the crankcase plays an active role in the engine’s induction and fuel-air transfer process.
If unwanted air enters through a damaged seal, the engine may no longer operate with the intended air-fuel mixture.
The **SBT Sea-Doo Crankshaft End Seal Kit 21-101** is designed to replace the corresponding end seals in compatible Sea-Doo engines.
## Why Are Crankshaft Seals Important in Two-Stroke Engines?
Two-stroke engines rely on pressure changes inside the crankcase to move the incoming fuel-air mixture through the engine.
The crankcase must maintain the correct pressure and vacuum conditions for proper operation.
A damaged crankshaft seal can disrupt these pressure changes.
This can affect:
– Air-fuel mixture control
– Engine starting
– Idle quality
– Acceleration
– Overall engine performance
– Engine operating temperature
– Long-term engine reliability
An air leak may cause a lean running condition, potentially increasing the risk of piston and cylinder damage.
Maintaining crankcase sealing is therefore an important part of two-stroke engine maintenance.
## Signs Your Sea-Doo Crankshaft Seals May Need Replacing
Possible symptoms of worn or damaged crankshaft seals include:
– Difficult starting
– Unstable or inconsistent idle
– Unexplained high idle speed
– Poor acceleration
– Lean running symptoms
– Excessive engine heat
– Crankcase pressure or vacuum test failure
– Visible seal deterioration
– Oil leakage around the relevant sealing area
– Damage discovered during engine disassembly
These symptoms can also result from other engine faults.
A crankcase pressure and vacuum test can help identify sealing problems before repairs are carried out.
## Why Replace Crankshaft Seals During an Engine Rebuild?
When rebuilding a Sea-Doo two-stroke engine, the crankshaft and crankcase are often separated.
This provides an opportunity to inspect the crankshaft end seals and surrounding components.
Reusing old or deteriorated seals can increase the risk of crankcase air leaks after reassembly.
The **SBT Sea-Doo Crankshaft End Seal Kit 21-101** is designed for use during compatible crankshaft installation and engine rebuilding.
Replacing the end seals during the rebuild helps ensure the sealing components are in suitable condition.
## Crankshaft End Seals vs Centre Seals
It is important to understand the difference between crankshaft end seals and centre seals.
### Crankshaft End Seals
End seals are positioned at the outer ends of the crankshaft.
They help maintain sealing between the crankcase and the surrounding environment.
### Crankshaft Centre Seals
Centre seals are located internally along the crankshaft assembly, where applicable.
They help maintain separation between the relevant crankcase chambers.
**The SBT 21-101 kit contains crankshaft end seals only.**
**Centre crankshaft seals are NOT included.**
If your engine requires centre seal replacement, additional crankshaft servicing or components may be necessary.
## What’s Included?
| Component | Included |
|—|—|
| Crankshaft End Seal Kit | Yes |
| Rubber and Steel End Seals | Yes |
| Centre Crankshaft Seals | No |
| Complete Crankshaft Assembly | No |
| Crankshaft Bearings | Not Specified |
| Complete Engine Gasket Kit | No |
**Please Note:** The exact number of individual end seals supplied has not been specified.
This listing is for the crankshaft end seal kit, not a complete crankshaft rebuild kit.
## Installation Information
Crankshaft end seal replacement generally requires engine disassembly and access to the crankshaft and crankcase.
### Recommended Installation Procedure
1. Confirm the Sea-Doo engine model and crankshaft configuration.
2. Refer to the applicable Sea-Doo service manual.
3. Disassemble the engine as required.
4. Remove the crankshaft according to the manufacturer’s procedure.
5. Inspect the crankshaft sealing surfaces.
6. Check the crankcase for damage or wear.
7. Remove the original crankshaft end seals.
8. Compare the replacement seals with the original components.
9. Install the new seals using the correct orientation and installation method.
10. Reassemble the crankshaft and crankcase.
11. Follow the manufacturer’s specified sealant and torque procedures.
12. Perform a crankcase pressure and vacuum test.
13. Confirm the engine is correctly sealed before returning it to service.
**Professional installation is recommended.**
Incorrect seal installation or damaged crankshaft sealing surfaces can result in crankcase air leaks and engine damage.
## Important Product Information
– **Brand:** SBT
– **SKU:** 21-101
– **Product:** Sea-Doo Crankshaft End Seal Kit
– **Compatible Engines:** 587, 657, 657X, 717 and 720
– **Listed Models:** SP, GT, SPI, XP, GTS, GTX, SPX, HX and GTI
– **Engine Type:** Two-Stroke
– **Seal Materials:** Rubber and Steel
– **Application:** Crankshaft Installation and Crankcase Sealing
– **Centre Seals:** Not Included
– **Crankshaft Assembly:** Not Included
– **Exact Model Years:** Not Specified
– **Individual Seal Quantity:** Not Confirmed
– Confirm engine and crankshaft compatibility before ordering.
– Inspect all sealing surfaces during installation.
– Pressure and vacuum testing is recommended after engine assembly.
## Order Your Sea-Doo Crankshaft End Seal Kit from Performance Jetski
Protect your Sea-Doo engine from damaging crankcase air leaks with the **SBT Sea-Doo Crankshaft End Seal Kit 21-101**.
Designed for selected **Sea-Doo 587, 657, 657X, 717 and 720 two-stroke engines**, this replacement kit uses durable rubber and steel sealing components to withstand demanding engine operating conditions.
Whether you’re installing a replacement crankshaft, repairing a crankcase air leak or completing an engine rebuild, the **SBT 21-101 Crankshaft End Seal Kit** provides replacement end seals for compatible Sea-Doo applications.
**Confirm your Sea-Doo engine configuration before ordering. Centre crankshaft seals are not included.**





