Rod Bearing – Kawasaki 12F (PRE ORDER)

$45.00 (inc GST)

$45.00 (inc GST)

Colour
This option is required
Black Blue Brown
Clear selection
- +

*NOTE* All Pre-Orders & Custom Orders Can Have Up To A 3-4 Week Lead Time

SKU: 23-213-50 Categories: , ,

# PRE ORDER – Kawasaki STX 12F Connecting Rod Bearing 23-213-50 – SBT

The **Kawasaki Rod Bearing 23-213-50** is a new aftermarket OE replacement connecting rod bearing supplied by **SBT**, listed for compatible Kawasaki STX 12F personal watercraft engines.

This replacement component is supplied as **one pair of rod bearings**, making it an option for engine rebuilding, connecting rod repairs and replacement of worn or damaged internal engine bearing components.

The connecting rod bearing is an essential component within the engine’s rotating assembly, supporting the connection between the connecting rod and crankshaft journal.

During engine operation, the connecting rod transfers forces generated by piston movement to the crankshaft, helping convert the piston’s reciprocating movement into rotational motion.

The connecting rod bearing provides a bearing surface between the connecting rod’s big end and the crankshaft journal.

Correct bearing clearance and lubrication are essential for maintaining the intended operation of the engine’s rotating assembly.

Over time, connecting rod bearings may become worn or damaged due to mechanical stress, contamination, insufficient lubrication, overheating or internal engine failure.

A worn or damaged rod bearing may contribute to unusual engine noises, excessive bearing clearance, reduced oil-film effectiveness or damage to the crankshaft journal and connecting rod.

The **SBT 23-213-50** provides a replacement option for compatible Kawasaki 12F engines requiring the specified connecting rod bearing.

This product is associated with **Kawasaki OEM reference number 92139-1092**.

**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.

**IMAGE DISCLAIMER:** The product image displayed is for representation purposes only and may not show the actual bearing supplied.

## Product Details

– **Brand:** SBT
– **SKU:** 23-213-50
– **Product Type:** Connecting Rod Bearing
– **Watercraft Brand:** Kawasaki
– **Model Application:** Kawasaki STX 12F
– **Engine Type:** Four-Stroke
– **Bearing Location:** Connecting Rod Big End
– **Quantity Supplied:** 1 Pair
– **OEM Reference:** 92139-1092
– **Replacement Type:** New Aftermarket OE Replacement
– **Application:** Connecting Rod Bearing Replacement and Engine Rebuilding
– **Condition:** New
– **Availability:** PRE ORDER
– **Image:** Representative Only

## What’s Included?

The **Kawasaki Rod Bearing 23-213-50** is supplied as:

– **1 pair of connecting rod bearing components**

A connecting rod bearing pair generally consists of two bearing shells fitted around the crankshaft’s connecting rod journal.

These bearing shells form the bearing surfaces between the connecting rod assembly and crankshaft journal.

**Important:** This product is supplied as one pair, not a complete engine connecting rod bearing set.

The supplied product information does not specify bearing thickness, dimensions or colour-coded bearing grade.

Additional bearing pairs may be required when rebuilding an engine with multiple connecting rods.

## Compatible Kawasaki Models

The **Kawasaki Rod Bearing 23-213-50** is listed for compatible Kawasaki 12F applications.

| Kawasaki Model | Bearing Application |
|—|—|
| Kawasaki STX 12F | Connecting Rod Bearing – 1 Pair |

**Important:** Exact production years and engine-specific bearing selection information have not been provided.

Always verify that **SBT part number 23-213-50** and OEM reference **92139-1092** match the required connecting rod bearing for your engine.

Compatibility with Kawasaki STX 15F or other Kawasaki models has not been confirmed for this SKU.

## Features & Benefits

### New SBT Replacement Rod Bearing

Supplied as a new aftermarket OE replacement connecting rod bearing for compatible Kawasaki engines.

### Kawasaki STX 12F Application

Listed for compatible Kawasaki STX 12F personal watercraft engines.

### Supplied as One Pair

Includes one pair of connecting rod bearing components for the specified application.

### OEM Reference Identification

Associated with Kawasaki OEM part number 92139-1092 to assist with replacement part identification.

### Supports Connecting Rod Movement

Provides the bearing surfaces required between the connecting rod big end and crankshaft journal.

### Suitable for Engine Rebuilding

Intended for replacement of worn or damaged connecting rod bearings during compatible engine rebuilding and repairs.

### Pre-Order Availability

Available for pre-order, subject to supplier availability.

## What Does a Connecting Rod Bearing Do?

The **Kawasaki Rod Bearing 23-213-50** is designed to provide a bearing surface between the connecting rod and crankshaft journal.

The connecting rod transfers forces between the piston and crankshaft during engine operation.

As the crankshaft rotates, the connecting rod big end moves around its crankshaft journal.

The connecting rod bearing supports this movement while maintaining the required operating clearance.

In a pressure-lubricated four-stroke engine, a lubricating oil film helps separate the crankshaft journal from the bearing surfaces.

Correct bearing condition, oil clearance and lubrication are essential for maintaining the intended operation of the rotating assembly.

A worn or damaged connecting rod bearing may allow excessive movement, reduce oil-film effectiveness or contribute to damage to the crankshaft journal and connecting rod.

## Understanding Connecting Rod Bearing Pairs

Connecting rod bearings commonly use two bearing shells.

### Upper Bearing Shell

One half of the bearing arrangement is positioned within the connecting rod big end.

### Lower Bearing Shell

The corresponding half is positioned within the connecting rod cap.

Together, the two shells form the bearing surfaces around the crankshaft’s connecting rod journal.

The **SBT 23-213-50** is supplied as one pair.

The correct bearing dimensions and grade must be confirmed before installation.

## Connecting Rod Bearings vs Main Bearings

Connecting rod bearings and crankshaft main bearings perform different functions within an engine.

### Connecting Rod Bearings

Support the connecting rod at its crankshaft journal.

### Main Bearings

Support the crankshaft within the engine block or crankcase.

### Why the Difference Matters

These bearings may have different dimensions, grades, clearances and installation requirements.

The **Kawasaki Rod Bearing 23-213-50** is specifically identified as a connecting rod bearing.

It should not be substituted for a center main, mid main or end main bearing.

## Understanding Kawasaki OEM Part Number 92139-1092

The **SBT 23-213-50** is associated with Kawasaki OEM reference **92139-1092**.

This reference can assist with identifying the required replacement component.

However, bearing selection should not rely solely on the OEM reference without confirming the applicable engine specifications.

The correct bearing may depend on factors such as crankshaft journal measurements, connecting rod dimensions and required oil clearance.

Always refer to the appropriate Kawasaki service manual when selecting internal engine bearings.

## Why Correct Rod Bearing Clearance Matters

Connecting rod bearing clearance is an important consideration during engine rebuilding.

The required clearance depends on the engine design, bearing dimensions and mating component specifications.

Incorrect bearing clearance may contribute to:

– Excessive connecting rod movement
– Reduced oil-film effectiveness
– Increased bearing wear
– Abnormal mechanical noise
– Overheating
– Crankshaft journal damage
– Premature engine failure

The correct bearing grade and clearance must be determined using the applicable Kawasaki service manual.

Do not select a replacement bearing based solely on its general appearance.

## Understanding Kawasaki STX 12F Bearing Compatibility

The Kawasaki STX 12F is a four-stroke personal watercraft model.

Although some Kawasaki engine components may share similar designs, individual connecting rod bearings are not necessarily interchangeable.

Compatibility depends on factors such as:

– Watercraft model
– Engine model
– Production year
– Connecting rod design
– Bearing dimensions
– Bearing grade
– Required oil clearance
– Crankshaft journal dimensions
– Connecting rod big-end dimensions
– Original OEM specifications

The **SBT 23-213-50** is listed for compatible Kawasaki 12F connecting rod bearing applications.

Always verify the required bearing specifications before ordering.

## Signs of Worn or Damaged Connecting Rod Bearings

Possible symptoms include:

– Unusual engine knocking
– Metallic tapping or rattling noises
– Increased mechanical vibration
– Abnormal engine noise
– Excessive connecting rod bearing clearance
– Reduced engine oil pressure
– Metal particles in engine oil
– Visible bearing surface damage
– Bearing overheating
– Crankshaft journal damage
– Engine seizure in severe cases

These symptoms can also be caused by other mechanical problems.

A complete engine inspection is recommended before replacing internal bearing components.

## Why Replace Your Kawasaki Rod Bearing?

Connecting rod bearings experience repeated mechanical loads during engine operation.

Over time, wear, contamination, lubrication problems or overheating may affect bearing condition.

A worn connecting rod bearing may no longer maintain the intended operating clearance.

If the problem is not addressed, further damage to the crankshaft and connecting rod may occur.

Replacing confirmed worn or damaged connecting rod bearings is an important part of restoring the mechanical condition of the engine.

The **Kawasaki Rod Bearing 23-213-50** provides an SBT replacement option for compatible Kawasaki engine repairs.

## Ideal for Kawasaki STX 12F Engine Rebuilding

This replacement bearing pair is intended for:

– Compatible Kawasaki STX 12F engine rebuilding
– Connecting rod bearing replacement
– Internal engine repairs
– Crankshaft journal maintenance
– Four-stroke personal watercraft engine restoration
– Replacement of worn or damaged rod bearing components
– Engine repairs requiring OEM reference 92139-1092

## Important Installation Information

Connecting rod bearing replacement requires appropriate mechanical knowledge, measuring equipment and access to the correct service specifications.

Before installation:

1. Confirm that SKU 23-213-50 matches the required connecting rod bearing.
2. Verify compatibility with your Kawasaki STX 12F.
3. Check Kawasaki OEM reference 92139-1092.
4. Refer to the appropriate Kawasaki service manual.
5. Identify the required bearing grade and specifications.
6. Disassemble the engine as required.
7. Inspect the original connecting rod bearing components.
8. Check the crankshaft journal and connecting rod big-end surfaces.
9. Inspect for scoring, overheating or abnormal wear.
10. Compare the replacement bearings with the original components.
11. Confirm the correct bearing dimensions and grade.
12. Verify the required oil clearance using the manufacturer’s procedures.
13. Inspect the associated oil passages and lubrication system.
14. Install the bearing shells in their correct positions and orientations.
15. Use the specified assembly lubrication and installation procedures.
16. Tighten associated fasteners according to the manufacturer’s specifications.
17. Verify correct connecting rod movement and operating clearances.
18. Reassemble the engine according to the Kawasaki service manual.
19. Confirm proper lubrication and engine operation before returning the watercraft to service.

**Important:** Incorrect bearing selection or installation can result in serious internal engine damage.

Professional installation by an experienced Kawasaki personal watercraft engine technician is strongly recommended.

## Important Product Information

**Brand:** SBT
**SKU:** 23-213-50
**Product:** Connecting Rod Bearing
**Watercraft Brand:** Kawasaki
**Model Application:** STX 12F
**Engine Type:** Four-Stroke
**Bearing Location:** Connecting Rod Big End
**Quantity Supplied:** 1 Pair
**OEM Reference:** 92139-1092
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Availability:** PRE ORDER

**Please Note:**

– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Kawasaki OEM part.
– Listed for compatible Kawasaki STX 12F applications.
– Exact model years have not been provided.
– Supplied as one pair, not a complete engine bearing set.
– Bearing colour, thickness, dimensions and oil clearance specifications have not been provided.
– Confirm the required bearing grade before ordering.
– Compatibility with Kawasaki STX 15F has not been confirmed.
– This is a connecting rod bearing, not a crankshaft main bearing.
– Additional engine components may be required during rebuilding.
– Professional installation is recommended.
– **Product image is for representation purposes only and may not show the actual item supplied.**

The **Kawasaki Rod Bearing 23-213-50** by SBT is a new aftermarket OE replacement connecting rod bearing supplied as one pair for compatible Kawasaki STX 12F personal watercraft engines. Associated with Kawasaki OEM reference 92139-1092, this product is intended for connecting rod bearing replacement and engine rebuilding applications. Available for pre-order.

Weight0.04 kg
Dimensions12 × 10 × 2 cm
Colour

Black, Blue, Brown

2003 KAWASAKI
2003 Kawasaki STX-12F
2004 KAWASAKI
2004 Kawasaki STX-12F
2005 KAWASAKI
2005 Kawasaki STX-12F
2006 KAWASAKI
2006 Kawasaki STX-12F
2007 KAWASAKI
2007 Kawasaki STX-12F

Shopping Cart
Scroll to Top