# PRE ORDER – Sea-Doo 587/657 PTO Inner Outer Crankshaft Bearing 23-101-212 – SBT
The **Sea-Doo Crankshaft Bearing 23-101-212** is a new aftermarket OE replacement crankshaft bearing supplied by **SBT**, designed for compatible Sea-Doo 587 and 657 two-stroke personal watercraft engines.
This replacement component is specifically identified as a **PTO inner/outer crankshaft bearing**, making it an option for crankshaft rebuilding and bearing replacement applications requiring the specified SBT part number.
The PTO, or **Power Take-Off**, is the end of the crankshaft responsible for transferring rotational power from the engine to the watercraft’s driveline system.
Crankshaft bearings are essential internal engine components that support the crankshaft as it rotates during engine operation.
During operation, crankshaft bearings experience repeated mechanical loads, rotational movement and changes in operating temperature.
Over time, crankshaft bearings may become worn or damaged due to mechanical stress, corrosion, contamination, lubrication-related problems or internal engine failure.
A worn or damaged PTO crankshaft bearing may contribute to unusual engine noises, excessive vibration, rough crankshaft rotation or damage to surrounding engine components.
The **SBT 23-101-212** provides a replacement option for compatible Sea-Doo 587 and 657 crankshaft assemblies requiring this PTO-side bearing specification.
**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.
## Product Details
– **Brand:** SBT
– **SKU:** 23-101-212
– **Product Type:** Crankshaft Bearing
– **Watercraft Brand:** Sea-Doo
– **Engine Applications:** Sea-Doo 587 / 657
– **Engine Type:** Two-Stroke
– **Bearing Location:** PTO (Power Take-Off) Side
– **Bearing Positions Referenced:** PTO Inner / Outer
– **Replacement Type:** New Aftermarket OE Replacement
– **Application:** Crankshaft Bearing Replacement and Engine Rebuilding
– **Condition:** New
– **Availability:** PRE ORDER
## Compatible Sea-Doo Engines
The **Sea-Doo Crankshaft Bearing 23-101-212** is listed for compatible Sea-Doo 587 and 657 crankshaft applications.
| Sea-Doo Engine | Bearing Application |
|—|—|
| Sea-Doo 587 | PTO Inner / Outer Crankshaft Bearing |
| Sea-Doo 657 | PTO Inner / Outer Crankshaft Bearing |
**Important:** The supplied product information does not specify individual watercraft models, production years or a complete crankshaft bearing position diagram.
The technical description uses the wording **“PTO Inner Outer”**, but does not clarify whether this bearing fits both positions or identifies one specific position within the crankshaft assembly.
Always verify that **SBT part number 23-101-212** matches the original bearing and required crankshaft position before ordering.
## Features & Benefits
### New SBT Replacement Bearing
Supplied as a new aftermarket OE replacement crankshaft bearing for compatible Sea-Doo 587 and 657 engines.
### PTO-Side Crankshaft Application
Identified for PTO-side crankshaft bearing replacement applications.
### Inner/Outer Bearing Reference
The supplied description references PTO inner and outer positions, subject to confirmation of the specific crankshaft arrangement.
### Supports Crankshaft Rotation
Helps support the crankshaft and maintain its intended alignment during engine operation.
### Suitable for Crankshaft Rebuilding
Intended for replacement of worn or damaged crankshaft bearings during compatible engine rebuilding and repairs.
### Replacement for Worn or Damaged Bearings
Provides an option for replacing a crankshaft bearing that has been confirmed as worn or damaged.
### Pre-Order Availability
Available for pre-order, subject to supplier availability.
## What Does a Crankshaft Bearing Do?
The **Sea-Doo Crankshaft Bearing 23-101-212** is designed to support the crankshaft as it rotates inside the engine.
The crankshaft is responsible for converting piston movement into rotational motion.
Crankshaft bearings support the rotating crankshaft at designated positions while allowing rotational movement.
Correct bearing condition and installation are important for maintaining the intended crankshaft alignment and operation.
A worn or damaged bearing may allow excessive movement, increase mechanical friction or contribute to damage to surrounding crankshaft components.
Replacing damaged bearings is an important part of maintaining the mechanical condition of a rebuilt crankshaft assembly.
## What Does PTO Mean?
**PTO stands for Power Take-Off.**
In a Sea-Doo personal watercraft engine, the PTO side is the end of the crankshaft associated with transferring engine power to the driveline.
The crankshaft converts the pistons’ reciprocating movement into rotational motion.
This rotational movement is transferred through the PTO arrangement to the driveline and ultimately to the jet pump.
### Why the PTO Side Matters
The PTO side is an important part of the engine’s power transmission system.
Correct crankshaft support is essential for maintaining the intended rotational movement and alignment of the crankshaft assembly.
A worn or damaged PTO-side bearing may contribute to excessive movement, vibration or damage to associated components.
The **SBT 23-101-212** is specifically identified for PTO-side crankshaft bearing applications.
## Understanding PTO Inner and Outer Bearings
Sea-Doo two-stroke crankshaft assemblies may use multiple bearings positioned along the crankshaft.
The PTO side is the end of the crankshaft associated with the engine’s power take-off arrangement.
### PTO Inner Bearing
A bearing positioned toward the inner portion of the PTO-side crankshaft bearing arrangement.
### PTO Outer Bearing
A bearing positioned toward the outer portion of the PTO-side crankshaft bearing arrangement.
### Why Bearing Position Matters
Different bearing positions may require different specifications, including:
– Bearing dimensions
– Internal clearance
– Locating-pin configuration
– Lubrication provisions
– Shaft and housing fits
The **SBT 23-101-212** is described as a PTO inner/outer crankshaft bearing.
However, the supplied technical information does not confirm whether the same bearing is interchangeable between both positions on every listed engine.
Always verify the exact bearing location before installation.
## PTO Bearings vs Flywheel Bearings
Sea-Doo crankshaft assemblies use bearings at different locations to support the rotating crankshaft.
### PTO-Side Bearings
Located toward the power take-off end of the crankshaft.
### Flywheel-Side Bearings
Located toward the flywheel or magneto end of the crankshaft.
### Center Bearings
Located within the central portion of the crankshaft assembly.
These bearings may have different dimensions, internal clearances or locating features.
The **Sea-Doo Crankshaft Bearing 23-101-212** is specifically described as a PTO-side bearing.
It should not be assumed to replace a flywheel-side or center bearing without confirming the required specifications.
## Understanding Sea-Doo 587/657 Crankshaft Bearing Compatibility
Sea-Doo 587 and 657 engines are two-stroke engine platforms used in personal watercraft applications.
Although some Sea-Doo engines may share similar crankshaft components, individual bearings are not necessarily interchangeable.
Compatibility depends on factors such as:
– Engine model
– Crankshaft design
– PTO inner or outer bearing position
– Bearing dimensions
– Internal clearance classification
– Locating features
– Shaft and housing fit
– Lubrication requirements
– Original bearing specifications
The **SBT 23-101-212** is listed for compatible Sea-Doo 587 and 657 PTO-side crankshaft applications.
Always verify the required specifications before ordering.
## Does This Bearing Have C3 Internal Clearance?
The supplied product description identifies the **SBT 23-101-212** as a replacement PTO inner/outer crankshaft bearing.
However, it does not specify a C3 internal clearance classification.
C3 is a bearing clearance designation indicating greater-than-normal internal clearance.
Some crankshaft applications require C3 bearings, while others may require different specifications.
**Important:** Do not assume this bearing has C3 clearance unless confirmed by the manufacturer or original bearing specifications.
Always match the replacement bearing to the required clearance classification.
## Does This Bearing Have a Locating Pin?
Some crankshaft bearings use locating pins or other positioning features.
These features can be important for maintaining the intended bearing arrangement within a crankshaft assembly.
The supplied description for **SBT 23-101-212** does not confirm whether the bearing has a locating pin.
Before ordering, compare the original bearing and confirm whether a pinned or non-pinned configuration is required.
## Signs of a Worn or Damaged PTO Crankshaft Bearing
Possible symptoms include:
– Unusual engine knocking
– Grinding or rattling noises
– Increased mechanical vibration
– Rough crankshaft rotation
– Excessive crankshaft movement
– Bearing corrosion
– Visible bearing damage
– Metal contamination
– Internal engine noise
– Damage to surrounding crankshaft components
– Engine seizure in severe cases
These symptoms can also be caused by other mechanical problems.
A complete inspection of the crankshaft assembly and related engine components is recommended before replacing the bearing.
## Why Replace Your Sea-Doo PTO Crankshaft Bearing?
Crankshaft bearings are exposed to repeated mechanical loads during engine operation.
Over time, wear, corrosion, contamination or lubrication problems may affect bearing condition.
A worn bearing may no longer support the crankshaft as intended.
If the problem is not addressed, further damage to the crankshaft and surrounding engine components may occur.
Replacing confirmed worn or damaged crankshaft bearings is an important part of restoring the mechanical condition of the engine.
The **Sea-Doo Crankshaft Bearing 23-101-212** provides an SBT replacement option for compatible Sea-Doo crankshaft repairs.
## Ideal for Sea-Doo 587/657 Crankshaft Rebuilding
This replacement bearing is intended for:
– Sea-Doo 587 crankshaft rebuilding
– Sea-Doo 657 crankshaft rebuilding
– Compatible PTO-side bearing replacement
– PTO inner bearing replacement where confirmed
– PTO outer bearing replacement where confirmed
– Internal engine repairs
– Two-stroke engine restoration
– Personal watercraft engine maintenance
– Replacement of worn or damaged crankshaft bearings
## Important Installation Information
Crankshaft bearing replacement requires appropriate mechanical knowledge and specialised equipment.
Before installation:
1. Confirm that SKU 23-101-212 matches the required crankshaft bearing.
2. Verify compatibility with your specific Sea-Doo 587 or 657 engine.
3. Confirm the correct PTO inner or outer bearing position.
4. Refer to the appropriate Sea-Doo service manual.
5. Remove and disassemble the required engine components.
6. Inspect the crankshaft assembly for wear or damage.
7. Check the condition of the original bearing and surrounding components.
8. Compare the replacement bearing with the original part.
9. Confirm the correct bearing dimensions and specifications.
10. Verify the required internal clearance classification.
11. Confirm whether a locating pin or other positioning feature is required.
12. Inspect the shaft and bearing seating surfaces.
13. Use appropriate bearing removal and installation equipment.
14. Install the replacement bearing using the correct procedures.
15. Avoid applying installation force through the rolling elements.
16. Verify correct bearing seating and crankshaft alignment.
17. Check crankshaft runout against the manufacturer’s specifications.
18. Inspect associated seals and crankshaft components.
19. Reassemble the engine according to the manufacturer’s procedures.
20. Confirm correct crankshaft rotation before returning the engine to service.
**Important:** Incorrect crankshaft bearing installation can result in serious internal engine damage.
Crankshaft rebuilding may require specialised pressing, measuring and alignment equipment.
Professional installation by an experienced Sea-Doo two-stroke engine rebuilding technician is strongly recommended.
## Important Product Information
**Brand:** SBT
**SKU:** 23-101-212
**Product:** PTO Inner/Outer Crankshaft Bearing
**Watercraft Brand:** Sea-Doo
**Engine Applications:** Sea-Doo 587 / 657
**Bearing Location:** PTO Side
**Bearing Positions Referenced:** PTO Inner / Outer
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Availability:** PRE ORDER
**Please Note:**
– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Sea-Doo OEM part.
– Listed for compatible Sea-Doo 587 and 657 engines.
– Exact watercraft models and production years have not been provided.
– The technical description references PTO inner and outer positions without clarifying interchangeability.
– Confirm the correct bearing position before ordering.
– Internal clearance classification has not been specified.
– Bearing dimensions and locating-pin configuration have not been specified.
– The number of bearings supplied has not been specified.
– Additional seals or crankshaft components may be required.
– Professional crankshaft rebuilding is recommended.
The **Sea-Doo Crankshaft Bearing 23-101-212** by SBT is a new aftermarket OE replacement PTO-side crankshaft bearing listed for compatible Sea-Doo 587 and 657 two-stroke engines. Intended for crankshaft rebuilding, engine repairs and replacement of worn or damaged PTO-side bearings, this component is available for pre-order.





