C3 Crankshaft Bearing for Sea-Doo 587 (PRE ORDER)

$30.00 (inc GST)

Available on back-order

*NOTE* All Pre-Orders & Custom Orders Can Have Up To A 3-4 Week Lead Time

SKU: 23-101-211 Categories: , ,

# PRE ORDER – Sea-Doo 587 C3 Crankshaft Center Bearing 23-101-211 – SBT

The **Sea-Doo Crankshaft Bearing 23-101-211** is a new aftermarket OE replacement C3 crankshaft center bearing supplied by **SBT**, designed for compatible Sea-Doo 587 two-stroke personal watercraft engines.

This replacement bearing is specifically identified as a **crankshaft center bearing with C3 internal clearance**, making it suitable for compatible crankshaft assemblies requiring this bearing position and clearance specification.

Crankshaft bearings are essential internal engine components responsible for supporting the crankshaft as it rotates during engine operation.

The crankshaft converts the pistons’ reciprocating movement into rotational motion, allowing engine power to be transferred through the driveline system.

During operation, crankshaft bearings experience repeated mechanical loads, high rotational speeds and changes in operating temperature.

Over time, crankshaft bearings may become worn or damaged due to mechanical stress, corrosion, contamination, lubrication-related problems or internal engine failure.

A worn or damaged crankshaft center bearing may contribute to unusual engine noises, excessive vibration, rough crankshaft rotation or damage to surrounding engine components.

The **SBT 23-101-211** provides a replacement option for compatible Sea-Doo 587 crankshaft assemblies requiring a C3 center bearing.

**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.

## Product Details

– **Brand:** SBT
– **SKU:** 23-101-211
– **Product Type:** Crankshaft Center Bearing
– **Watercraft Brand:** Sea-Doo
– **Engine Application:** Sea-Doo 587
– **Engine Type:** Two-Stroke
– **Bearing Position:** Crankshaft Center
– **Internal Clearance:** C3
– **Replacement Type:** New Aftermarket OE Replacement
– **Application:** Crankshaft Bearing Replacement and Engine Rebuilding
– **Condition:** New
– **Availability:** PRE ORDER

## Compatible Sea-Doo Engines

The **Sea-Doo Crankshaft Bearing 23-101-211** is listed for compatible Sea-Doo 587 crankshaft applications.

| Sea-Doo Engine | Bearing Position | Internal Clearance |
|—|—|—|
| Sea-Doo 587 | Crankshaft Center | C3 |

**Important:** The supplied product information does not specify individual Sea-Doo watercraft models or production years.

Always verify that **SBT part number 23-101-211** matches the original crankshaft center bearing and required engine configuration before ordering.

## Features & Benefits

### New SBT Replacement Bearing

Supplied as a new aftermarket OE replacement crankshaft center bearing for compatible Sea-Doo 587 engines.

### C3 Internal Clearance

Features a C3 internal clearance classification for applications requiring greater-than-normal bearing clearance.

### Center Crankshaft Position

Specifically identified for the center bearing position within compatible crankshaft assemblies.

### Supports Crankshaft Rotation

Helps support the crankshaft and maintain its intended operating alignment during engine operation.

### Suitable for Crankshaft Rebuilding

Intended for replacement of worn or damaged center crankshaft bearings during compatible engine repairs and rebuilding.

### Replacement for Worn or Damaged Bearings

Provides an option for replacing a crankshaft center bearing that has been confirmed as worn or damaged.

### Pre-Order Availability

Available for pre-order, subject to supplier availability.

## What Does a Crankshaft Center Bearing Do?

The **Sea-Doo Crankshaft Bearing 23-101-211** is designed to support the crankshaft at its designated center bearing position.

The crankshaft is responsible for converting piston movement into rotational motion.

Crankshaft bearings support the rotating crankshaft and help maintain the intended positioning of the crankshaft assembly.

The center bearing supports the crankshaft within its central bearing arrangement.

Correct bearing condition and installation are important for maintaining the intended crankshaft alignment and operation.

A worn or damaged center bearing may contribute to excessive movement, increased mechanical friction or damage to surrounding crankshaft components.

Replacing damaged center bearings is an important part of maintaining the mechanical condition of a rebuilt crankshaft assembly.

## What Does C3 Mean in a Crankshaft Bearing?

The **C3 classification** refers to the internal clearance of a rolling-element bearing.

C3 bearings have greater internal clearance than bearings with normal clearance classification.

This additional clearance may be required where operating temperatures, shaft fits or housing fits affect bearing clearance during operation.

### Why Correct Internal Clearance Matters

– Helps maintain the intended bearing operating clearance
– Accounts for changes caused by installation fits
– Accommodates thermal changes during engine operation
– Supports correct bearing function when installed to specification
– Matches applications designed to use C3 bearings

**Important:** C3 does not automatically mean that a bearing is stronger, higher performance or suitable for every crankshaft.

A replacement bearing must match the original manufacturer’s required specifications.

The **SBT 23-101-211** is specifically identified as a C3 bearing.

## Understanding Crankshaft Bearing Positions

Sea-Doo two-stroke crankshaft assemblies may use multiple bearings positioned along the crankshaft.

Each bearing supports the crankshaft at a designated location.

### Flywheel-Side Bearings

These bearings are positioned toward the flywheel or magneto side of the crankshaft.

### Center Bearings

Center bearings support the crankshaft within the central portion of the crankshaft assembly.

### PTO-Side Bearings

PTO-side bearings are positioned toward the power take-off end of the crankshaft.

The **SBT 23-101-211** is specifically identified as a center crankshaft bearing.

It should not be assumed to replace a flywheel outer or PTO outer bearing without confirming the required specifications.

## Why Crankshaft Bearing Compatibility Matters

Although some Sea-Doo engines may share similar crankshaft bearing dimensions, individual bearings are not necessarily interchangeable.

Compatibility depends on factors such as:

– Engine model
– Crankshaft design
– Bearing position
– Bearing dimensions
– Internal clearance classification
– Locating features
– Shaft and housing fit
– Lubrication requirements
– Original bearing specifications

The **SBT 23-101-211** is identified as a C3 crankshaft center bearing for compatible Sea-Doo 587 engines.

Always verify the required specifications before ordering.

## Signs of a Worn or Damaged Crankshaft Center Bearing

Possible symptoms include:

– Unusual engine knocking
– Grinding or rattling noises
– Increased mechanical vibration
– Rough crankshaft rotation
– Excessive crankshaft movement
– Bearing corrosion
– Visible bearing damage
– Metal contamination
– Internal engine noise
– Damage to surrounding crankshaft components
– Engine seizure in severe cases

These symptoms can also be caused by other mechanical problems.

A complete inspection of the crankshaft assembly and related engine components is recommended before replacing the bearing.

## Why Replace Your Sea-Doo Crankshaft Center Bearing?

Crankshaft bearings are exposed to repeated mechanical loads during engine operation.

Over time, wear, corrosion, contamination or lubrication problems may affect bearing condition.

A worn bearing may no longer support the crankshaft as intended.

If the problem is not addressed, further damage to the crankshaft and surrounding engine components may occur.

Replacing confirmed worn or damaged crankshaft center bearings is an important part of restoring the mechanical condition of the engine.

The **Sea-Doo Crankshaft Bearing 23-101-211** provides an SBT replacement option for compatible Sea-Doo crankshaft repairs.

## Ideal for Sea-Doo 587 Crankshaft Rebuilding

This replacement bearing is intended for:

– Sea-Doo 587 crankshaft rebuilding
– Center crankshaft bearing replacement
– C3 bearing replacement
– Internal engine repairs
– Two-stroke engine restoration
– Personal watercraft engine maintenance
– Replacement of worn or damaged crankshaft bearings

## Important Installation Information

Crankshaft bearing replacement requires appropriate mechanical knowledge and specialised equipment.

Before installation:

1. Confirm that SKU 23-101-211 matches the required crankshaft bearing.
2. Verify compatibility with your specific Sea-Doo 587 engine.
3. Confirm the correct center crankshaft bearing position.
4. Verify that C3 internal clearance is required.
5. Refer to the appropriate Sea-Doo service manual.
6. Remove and disassemble the required engine components.
7. Inspect the crankshaft assembly for wear or damage.
8. Check the condition of the original bearing and surrounding components.
9. Compare the replacement bearing with the original part.
10. Confirm the correct bearing dimensions and specifications.
11. Inspect the shaft and bearing seating surfaces.
12. Use appropriate bearing removal and installation equipment.
13. Install the replacement bearing using the correct procedures.
14. Avoid applying installation force through the rolling elements.
15. Verify correct bearing seating and crankshaft alignment.
16. Check crankshaft runout against the manufacturer’s specifications.
17. Inspect associated seals and crankshaft components.
18. Reassemble the engine according to the manufacturer’s procedures.
19. Confirm correct crankshaft rotation before returning the engine to service.

**Important:** Incorrect crankshaft bearing installation can result in serious internal engine damage.

Crankshaft rebuilding may require specialised pressing, measuring and alignment equipment.

Professional installation by an experienced Sea-Doo two-stroke engine rebuilding technician is strongly recommended.

## Important Product Information

**Brand:** SBT
**SKU:** 23-101-211
**Product:** C3 Crankshaft Center Bearing
**Watercraft Brand:** Sea-Doo
**Engine Application:** Sea-Doo 587
**Bearing Position:** Crankshaft Center
**Internal Clearance:** C3
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Availability:** PRE ORDER

**Please Note:**

– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Sea-Doo OEM part.
– Listed for compatible Sea-Doo 587 engines.
– Exact watercraft models and production years have not been provided.
– Confirm the correct center bearing position before ordering.
– Confirm that C3 internal clearance is required.
– Bearing dimensions and locating features have not been specified.
– The number of bearings supplied has not been specified.
– Additional seals or crankshaft components may be required.
– Professional crankshaft rebuilding is recommended.

The **Sea-Doo Crankshaft Bearing 23-101-211** by SBT is a new aftermarket OE replacement C3 center crankshaft bearing for compatible Sea-Doo 587 two-stroke engines. Designed for crankshaft rebuilding, engine repairs and replacement of worn or damaged center bearings, this component is available for pre-order.

Weight0.35 kg
Dimensions12 × 10 × 2 cm

1989 SEA-DOO
1989 Sea-Doo SP
1990 SEA-DOO
1990 Sea-Doo GT
1990 Sea-Doo SP
1991 SEA-DOO
1991 Sea-Doo GT
1991 Sea-Doo SP
1991 Sea-Doo XP
1992 SEA-DOO
1992 Sea-Doo GTS
1992 Sea-Doo GTX
1992 Sea-Doo SP
1992 Sea-Doo XP
1993 SEA-DOO
1993 Sea-Doo GTS
1993 Sea-Doo GTX
1993 Sea-Doo SP
1993 Sea-Doo SPI
1993 Sea-Doo SPX
1994 SEA-DOO
1994 Sea-Doo GTS
1994 Sea-Doo SP
1994 Sea-Doo SPI
1995 SEA-DOO
1995 Sea-Doo GTS
1995 Sea-Doo SP
1995 Sea-Doo SPI
1996 SEA-DOO
1996 Sea-Doo SPI
1996 Sea-Doo GTS
1996 Sea-Doo SP

Shopping Cart
Scroll to Top