# PRE ORDER – Yamaha 1.8L HO Crankshaft Connecting Rod RD027C – SBT (2009–2013)
The **Yamaha 1.8L HO Connecting Rod RD027C** is a new aftermarket OE replacement crankshaft connecting rod supplied by **SBT**, designed for compatible Yamaha 1.8-litre HO (High Output) four-stroke personal watercraft engines within the listed **2009–2013** model range.
This replacement connecting rod corresponds to **Yamaha OEM part number 6BH-11650-00-00** and is supplied complete with **new connecting rod bolts**, providing essential components for connecting rod replacement during engine rebuilding and internal engine repairs.
The connecting rod is an important internal component of the Yamaha 1.8L HO engine. It connects the piston to the crankshaft, transferring combustion forces and helping convert the piston’s up-and-down movement into rotational motion.
Yamaha 1.8L HO engines use a four-cylinder four-stroke configuration, with a connecting rod for each cylinder. These components operate under repeated mechanical loads and must maintain the correct relationship between the pistons and crankshaft.
A worn, bent or damaged connecting rod can contribute to unusual engine noises, excessive vibration and potentially serious internal engine damage.
The **SBT RD027C** provides a replacement option for compatible Yamaha 1.8L HO engines requiring connecting rod reference **6BH-11650-00-00**.
**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.
## Product Details
– **Brand:** SBT
– **SKU:** RD027C
– **Product Type:** Crankshaft Connecting Rod
– **Watercraft Brand:** Yamaha
– **Engine Application:** Yamaha 1.8L HO
– **Listed Model Years:** 2009–2013
– **Engine Configuration:** Four-Cylinder
– **Engine Type:** Four-Stroke
– **OEM Reference:** 6BH-11650-00-00
– **Replacement Type:** New Aftermarket OE Replacement
– **Included Components:** Connecting Rod and New Rod Bolts
– **Application:** Piston and Crankshaft Assembly
– **Condition:** New
– **Availability:** PRE ORDER
## What’s Included?
The **Yamaha 1.8L HO Connecting Rod RD027C** is supplied with:
– New replacement connecting rod
– New connecting rod bolts
The supplied rod bolts are intended for securing the connecting rod assembly according to the manufacturer’s specified installation procedure.
**Important:** The supplied product information does not confirm that connecting rod bearings, piston pins or other engine components are included.
This listing is for one replacement connecting rod with its supplied rod bolts, not a complete crankshaft assembly.
## Compatible Yamaha Engines
The **Yamaha 1.8L HO Connecting Rod RD027C** is listed for compatible Yamaha 1.8-litre HO engine applications.
| Yamaha Engine | Listed Years | OEM Reference |
|—|—|—|
| Yamaha 1.8L HO | 2009–2013 | 6BH-11650-00-00 |
**Important:** Exact watercraft models and individual production years should be confirmed before ordering.
The supplied 2009–2013 range represents the overall listed fitment period.
Always verify that your engine requires Yamaha OEM connecting rod **6BH-11650-00-00**.
Do not assume interchangeability with other Yamaha 1.8L connecting rod part numbers.
## Features & Benefits
### New SBT Replacement Connecting Rod
Supplied as a new aftermarket OE replacement component for compatible Yamaha 1.8L HO engines.
### Includes New Rod Bolts
The replacement connecting rod is supplied complete with new connecting rod bolts.
### Yamaha 1.8L HO Application
Listed for compatible Yamaha 1.8-litre HO engines within the 2009–2013 range.
### OEM Replacement Reference
Corresponds to Yamaha OEM part number **6BH-11650-00-00**.
### Suitable for Engine Rebuilding
Intended for replacing worn or damaged connecting rods during engine rebuilding and crankshaft repairs.
### Supports Piston and Crankshaft Operation
Transfers mechanical forces between the piston and crankshaft during engine operation.
### Pre-Order Availability
Available for pre-order, subject to supplier availability.
## What Does a Connecting Rod Do?
The **Yamaha 1.8L HO Connecting Rod RD027C** connects the piston to the crankshaft inside the engine.
During combustion, pressure forces the piston down inside the cylinder.
The connecting rod transfers this force to the crankshaft, helping convert the piston’s reciprocating movement into rotational motion.
As the crankshaft rotates, the connecting rod moves through its operating cycle while maintaining the connection between the piston and crankshaft.
The connecting rod must withstand repeated mechanical loads, high-speed movement and changes in direction.
Correct connecting rod condition and installation are important for reliable engine operation.
A worn or damaged connecting rod may affect piston movement, crankshaft rotation and overall engine reliability.
## Why Are Connecting Rods Important in Yamaha 1.8L HO Engines?
The Yamaha 1.8L HO is a four-cylinder four-stroke engine.
Each cylinder contains a piston connected to the crankshaft through a connecting rod.
The connecting rods help:
– Transfer combustion forces to the crankshaft
– Support normal piston movement
– Maintain the intended piston-to-crankshaft connection
– Convert reciprocating movement into crankshaft rotation
– Support reliable engine operation
A damaged connecting rod can affect the entire engine assembly.
Severe connecting rod failure may damage the piston, crankshaft, cylinder block and surrounding components.
## Why Are New Connecting Rod Bolts Important?
Connecting rod bolts are critical fasteners used to secure the connecting rod cap to the connecting rod body in split-rod designs.
These fasteners are subjected to repeated mechanical loads during engine operation.
Correct bolt condition, installation and tightening are essential for maintaining the connecting rod assembly.
The **SBT RD027C** includes new rod bolts, allowing the supplied connecting rod to be installed using new fasteners.
When installing connecting rod bolts, always follow the applicable Yamaha service manual.
Some engine fasteners use specific tightening sequences, torque values or torque-angle procedures.
Never assume that connecting rod bolts from another Yamaha engine are interchangeable.
## Understanding Yamaha 1.8L Connecting Rod Compatibility
Yamaha 1.8L engines have been produced in different configurations, including naturally aspirated and supercharged applications.
Although these engines share a similar displacement, their internal components are not necessarily interchangeable.
Connecting rod compatibility depends on factors such as:
– Engine configuration
– Crankshaft design
– Connecting rod dimensions
– Piston assembly specifications
– Original equipment part number
The **SBT RD027C** is listed as a replacement for Yamaha OEM **6BH-11650-00-00**.
This OEM reference should be used when checking compatibility with the original engine.
**Note:** RD027C and RD027E have different OEM references. Do not assume they are interchangeable.
## Signs of a Worn or Damaged Connecting Rod
Possible symptoms include:
– Unusual engine knocking
– Excessive mechanical noise
– Increased engine vibration
– Abnormal piston movement
– Connecting rod bearing wear
– Metal particles in the engine oil
– Reduced engine performance
– Internal engine damage
– Engine seizure
These symptoms can also result from other mechanical problems.
A complete engine inspection is recommended before replacing internal components.
## Why Replace Your Yamaha 1.8L HO Connecting Rod?
Connecting rods operate under significant mechanical loads throughout engine operation.
Over time, excessive wear, lubrication problems, overheating or internal engine damage may affect the condition of the connecting rod.
A worn or damaged connecting rod may no longer maintain the correct relationship between the piston and crankshaft.
If the problem is not addressed, further internal engine damage may occur.
Replacing a confirmed faulty connecting rod is an important part of restoring the mechanical condition of the engine.
The **Yamaha 1.8L HO Connecting Rod RD027C** provides an SBT replacement option for compatible Yamaha 1.8L HO engine repairs.
## Ideal for Yamaha 1.8L HO Engine Rebuilding
This replacement connecting rod is intended for:
– Yamaha 1.8L HO engine rebuilding
– Connecting rod replacement
– Crankshaft assembly repairs
– Piston and connecting rod servicing
– Internal engine maintenance
– Four-stroke engine restoration
– Personal watercraft engine repairs
## Important Installation Information
Connecting rod replacement requires specialist mechanical knowledge and appropriate tools.
Before installation:
1. Confirm that SKU RD027C matches the required connecting rod for your Yamaha engine.
2. Verify Yamaha OEM reference 6BH-11650-00-00.
3. Confirm the exact Yamaha model and production year.
4. Refer to the appropriate Yamaha service manual.
5. Remove and disassemble the engine as required.
6. Inspect the piston, crankshaft and connecting rod assembly.
7. Check the condition of the original connecting rod and related bearings.
8. Compare the replacement connecting rod with the original component.
9. Confirm the connecting rod dimensions and specifications.
10. Inspect the crankshaft journals for wear or damage.
11. Verify that the correct connecting rod bearings are available.
12. Install the replacement connecting rod using the manufacturer’s procedures.
13. Fit the supplied new connecting rod bolts.
14. Follow the manufacturer’s specified bolt tightening procedure.
15. Check relevant bearing clearances and connecting rod movement.
16. Reassemble the engine using the correct procedures.
17. Verify proper engine operation before returning the watercraft to service.
**Important:** Incorrect connecting rod installation or bolt tightening can result in serious internal engine damage.
Connecting rod replacement may require specialised measuring equipment and engine assembly procedures.
Professional installation by an experienced four-stroke engine technician is strongly recommended.
## Important Product Information
**Brand:** SBT
**SKU:** RD027C
**Product:** Crankshaft Connecting Rod with New Rod Bolts
**Watercraft Brand:** Yamaha
**Engine Application:** 1.8L HO
**Listed Model Years:** 2009–2013
**Engine Type:** Four-Cylinder Four-Stroke
**OEM Reference:** 6BH-11650-00-00
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Availability:** PRE ORDER
**Included Components:**
– Connecting Rod
– New Connecting Rod Bolts
**Please Note:**
– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Yamaha OEM part.
– This listing is for one replacement connecting rod with new rod bolts.
– Listed for compatible Yamaha 1.8L HO engines within the 2009–2013 range.
– Exact watercraft models and individual production years must be verified.
– OEM reference 6BH-11650-00-00 is provided for compatibility identification.
– Connecting rod bearings and additional engine components are not specified as included.
– Do not assume interchangeability with other Yamaha 1.8L connecting rod variants.
– Professional installation is recommended.
The **Yamaha 1.8L HO Connecting Rod RD027C** by SBT is a new aftermarket OE replacement crankshaft connecting rod for compatible Yamaha 1.8-litre HO four-cylinder four-stroke engines within the listed 2009–2013 range. Corresponding to Yamaha OEM reference **6BH-11650-00-00**, this replacement connecting rod is supplied complete with **new rod bolts** and is available for pre-order.





