# PRE ORDER – Kawasaki 750 / 900 SS SXi ZXi STS Crankshaft Connecting Rod Kit 23-205-104 – SBT (1992–1995)
The **Kawasaki Connecting Rod 23-205-104** is a new aftermarket OE replacement crankshaft connecting rod assembly kit supplied by **SBT**, designed for compatible Kawasaki 750 and 900 two-stroke personal watercraft engines within the listed **1992–1995** model range.
This replacement connecting rod kit is listed for selected Kawasaki SS, SXi, ZXi and STS applications requiring the corresponding crankshaft connecting rod configuration.
The kit is supplied complete with a connecting rod, washers, piston pin, lower rod bearing and wrist-pin bearing, providing essential components for crankshaft rebuilding and connecting rod replacement.
The connecting rod is an important internal engine component that links the piston to the crankshaft. During engine operation, it transfers combustion forces from the piston to the crankshaft, helping convert the piston’s up-and-down movement into rotational motion.
A worn or damaged connecting rod assembly can cause unusual engine noises, excessive vibration, increased mechanical wear and potentially serious internal engine damage.
The **SBT 23-205-104** provides a replacement option for compatible Kawasaki 750 and 900 crankshaft assemblies requiring this specific connecting rod kit.
**PRE ORDER ITEM:** This product is available for pre-order. Please confirm expected availability and dispatch time before purchasing.
## Product Details
– **Brand:** SBT
– **SKU:** 23-205-104
– **Product Type:** Crankshaft Connecting Rod Assembly Kit
– **Watercraft Brand:** Kawasaki
– **Engine Applications:** Kawasaki 750 / 900
– **Listed Model Families:** SS / SXi / ZXi / STS
– **Listed Model Years:** 1992–1995
– **Engine Type:** Two-Stroke
– **Replacement Type:** New Aftermarket OE Replacement
– **Application:** Crankshaft Rebuilding and Engine Repair
– **Condition:** New
– **Availability:** PRE ORDER
## What’s Included in the Kit?
The **Kawasaki Connecting Rod 23-205-104** is supplied as a replacement connecting rod assembly kit.
### Kit Includes
– Connecting rod
– Washers
– Piston pin
– Lower rod bearing
– Wrist-pin bearing
These components are intended for use during compatible crankshaft connecting rod repairs and rebuilding.
The lower rod bearing supports movement at the crankshaft end of the connecting rod, while the wrist-pin bearing supports movement at the piston end.
The supplied washers are used as part of the connecting rod assembly arrangement.
**Important:** The supplied product information does not specify the exact washer quantity or separately confirm whether a replacement crankpin is included.
This listing is for one connecting rod kit, not a complete crankshaft assembly.
## Compatible Kawasaki Models
The **Kawasaki Connecting Rod 23-205-104** is listed for selected Kawasaki 750 and 900 personal watercraft applications.
The supplied product information references the following model families:
– Kawasaki SS
– Kawasaki SXi
– Kawasaki ZXi
– Kawasaki STS
**Listed overall fitment range:** 1992–1995
**Important:** The supplied information does not identify the exact engine size, model variant and year combination for each model family.
The 1992–1995 range should not be interpreted as confirmation that every listed model was manufactured during, or uses this connecting rod throughout, that entire period.
Kawasaki 750 and 900 crankshaft assemblies may use different connecting rod configurations depending on the engine and production year.
Always confirm that **SBT SKU 23-205-104** matches your original connecting rod and crankshaft assembly before ordering.
## Features & Benefits
### New SBT Replacement Connecting Rod
Supplied as a new aftermarket OE replacement connecting rod assembly for compatible Kawasaki engines.
### Kawasaki 750 and 900 Applications
Listed for selected Kawasaki 750 and 900 two-stroke personal watercraft engines.
### Connecting Rod Assembly Components Included
Supplied with washers, piston pin, lower rod bearing and wrist-pin bearing.
### Suitable for Crankshaft Rebuilding
Intended for replacing worn or damaged connecting rod assembly components during crankshaft repairs.
### Supports Piston and Crankshaft Movement
Designed to transfer mechanical forces between the piston and crankshaft during engine operation.
### Suitable for Engine Restoration
Can be used as part of a compatible Kawasaki two-stroke engine rebuild or restoration project.
### Pre-Order Availability
Available for pre-order, subject to supplier availability.
## What Does a Crankshaft Connecting Rod Do?
The **Kawasaki Connecting Rod 23-205-104** connects the piston to the crankshaft inside the engine.
During combustion, pressure forces the piston down inside the cylinder.
The connecting rod transfers this force to the crankshaft, helping convert the piston’s reciprocating movement into rotational motion.
As the crankshaft rotates, the connecting rod continues moving through its operating cycle.
In a two-stroke engine, the connecting rod is subjected to repeated mechanical loads, high-speed movement and changes in direction.
Correct connecting rod condition and installation are important for reliable engine operation.
A worn or damaged connecting rod assembly may affect piston movement, crankshaft rotation and overall engine reliability.
## Why Are Connecting Rod Bearings Important?
Connecting rod bearings allow the connecting rod to move relative to the crankshaft and piston wrist pin.
The **SBT 23-205-104** kit includes both a lower rod bearing and a wrist-pin bearing.
### Lower Rod Bearing
The lower rod bearing is located at the big end of the connecting rod, where the rod connects to the crankshaft.
It supports the connecting rod’s movement around the crankpin during engine operation.
### Wrist-Pin Bearing
The wrist-pin bearing is located at the small end of the connecting rod, where the rod connects to the piston through the wrist pin.
It allows the connecting rod to pivot as the piston moves through the cylinder.
Both bearings are important for maintaining the intended movement of the connecting rod assembly.
## Why Are Connecting Rod Washers Important?
Connecting rod washers are used within the connecting rod assembly according to the crankshaft’s design.
Depending on the application, they may help maintain the required spacing and control side movement.
Correct washer selection and installation are important for maintaining the intended crankshaft assembly arrangement.
The **Kawasaki Connecting Rod 23-205-104** kit includes washers for the specified connecting rod application.
Always follow the appropriate Kawasaki service information when assembling the crankshaft.
## Signs of a Worn or Damaged Connecting Rod Assembly
Possible symptoms include:
– Unusual engine knocking
– Rattling or grinding noises
– Excessive engine vibration
– Worn connecting rod bearings
– Excessive connecting rod movement
– Rough crankshaft rotation
– Damaged crankshaft components
– Metal particles inside the engine
– Internal engine damage
– Engine seizure
These symptoms can also be caused by other mechanical problems.
A complete engine and crankshaft inspection is recommended before replacing internal components.
## Why Replace Your Kawasaki Connecting Rod?
Connecting rods and their bearings are exposed to repeated mechanical loads during normal engine operation.
Over time, wear, corrosion, contamination or lubrication problems may damage the connecting rod assembly.
A worn lower rod bearing or damaged connecting rod may affect crankshaft rotation and piston movement.
If the problem is not addressed, further internal engine damage may occur.
Replacing confirmed worn or damaged connecting rod components is an important part of restoring the mechanical condition of the crankshaft.
The **Kawasaki Connecting Rod 23-205-104** provides an SBT replacement option for compatible Kawasaki 750 and 900 crankshaft repairs.
## Ideal for Kawasaki Crankshaft Rebuilding
This replacement connecting rod kit is intended for:
– Kawasaki 750 crankshaft rebuilding
– Kawasaki 900 crankshaft repairs
– Connecting rod replacement
– Lower rod bearing replacement
– Wrist-pin bearing replacement
– Internal engine maintenance
– Two-stroke engine restoration
– Personal watercraft engine repairs
## Important Installation Information
Crankshaft connecting rod replacement requires specialised mechanical knowledge and appropriate equipment.
Before installation:
1. Confirm that SKU 23-205-104 matches the required connecting rod kit.
2. Verify compatibility with your specific Kawasaki engine and crankshaft assembly.
3. Confirm the correct connecting rod dimensions and configuration.
4. Refer to the appropriate Kawasaki service manual and SBT technical instructions.
5. Remove and disassemble the engine as required.
6. Inspect the crankshaft assembly for wear or damage.
7. Check the condition of the original connecting rod, bearings and associated pins.
8. Compare the replacement components with the original parts.
9. Verify that all required crankshaft rebuilding components are available.
10. Use appropriate crankshaft pressing and assembly equipment.
11. Install the connecting rod and bearings according to the manufacturer’s procedures.
12. Check connecting rod side clearance and crankshaft alignment.
13. Confirm crankshaft runout is within the manufacturer’s specifications.
14. Reassemble the engine using the correct procedures.
15. Verify smooth crankshaft movement before returning the engine to service.
**Important:** Crankshaft rebuilding requires specialised pressing, measuring and alignment equipment.
Incorrect connecting rod installation or crankshaft assembly can result in serious internal engine damage.
Professional installation by an experienced two-stroke engine rebuilding technician is strongly recommended.
## Important Product Information
**Brand:** SBT
**SKU:** 23-205-104
**Product:** Crankshaft Connecting Rod Assembly Kit
**Watercraft Brand:** Kawasaki
**Engine Applications:** 750 / 900
**Listed Model Families:** SS / SXi / ZXi / STS
**Listed Model Years:** 1992–1995
**Engine Type:** Two-Stroke
**Replacement Type:** New Aftermarket OE Replacement
**Condition:** New
**Availability:** PRE ORDER
**Kit Includes:**
– Connecting Rod
– Washers
– Piston Pin
– Lower Rod Bearing
– Wrist-Pin Bearing
**Please Note:**
– This product is available for pre-order.
– Confirm expected availability and dispatch time before purchasing.
– This is an aftermarket SBT replacement component, not a genuine Kawasaki OEM part.
– This listing is for one connecting rod assembly kit.
– Listed for selected Kawasaki 750 and 900 applications.
– Exact model, engine and production year compatibility must be verified.
– Confirm the correct crankshaft configuration before ordering.
– The supplied information does not specify a complete crankshaft rebuild quantity.
– Additional crankshaft components may be required.
– Professional crankshaft rebuilding is recommended.
The **Kawasaki Connecting Rod 23-205-104** by SBT is a new aftermarket OE replacement connecting rod assembly kit for selected Kawasaki 750 and 900 personal watercraft engines. Listed for compatible SS, SXi, ZXi and STS applications within the supplied 1992–1995 range, this kit includes washers, piston pin, lower rod bearing and wrist-pin bearing and is available for pre-order.





