# PRE ORDER – Sea-Doo Carb Base Gasket 41-102-01 – SBT (1993–1995)
The **Sea-Doo Carb Base Gasket 41-102-01** by SBT is an aftermarket replacement carburettor base gasket designed for selected **1993–1995 Sea-Doo XP, SPX and GTX** personal watercraft.
This replacement gasket corresponds to **Sea-Doo OEM part number 420850373** and features a **40.5mm internal diameter (ID)** with **75.5mm stud centres**.
The carburettor base gasket creates a seal between the carburettor and its mating intake surface, helping prevent unwanted air leaks that may affect engine operation.
A worn, damaged or incorrectly fitted carburettor gasket can contribute to intake air leaks, poor engine performance and inconsistent running.
The **SBT 41-102-01 Carb Base Gasket** provides a replacement option for compatible Sea-Doo carburettor applications during servicing, repairs or engine reassembly.
## Product Details
– **Brand:** SBT
– **SKU:** 41-102-01
– **Product Type:** Carburettor Base Gasket
– **OEM Reference:** 420850373
– **Compatible Make:** Sea-Doo
– **Listed Models:** XP, SPX, GTX
– **Listed Year Range:** 1993–1995
– **Internal Diameter (ID):** 40.5mm
– **Stud Centres:** 75.5mm
– **Application:** Carburettor Base Sealing
– **Replacement Type:** Aftermarket
– **Availability:** PRE ORDER
## Compatible Sea-Doo Models
| Sea-Doo Model | Listed Year Range |
|—|—|
| Sea-Doo XP | 1993–1995* |
| Sea-Doo SPX | 1993–1995* |
| Sea-Doo GTX | 1993–1995* |
*The years shown represent the supplied overall fitment range, not confirmation that every model is compatible in every year.*
**Compatibility Note:** Confirm your watercraft’s engine configuration, carburettor dimensions and original gasket part number before ordering.
## Features & Benefits
– **OEM Replacement Reference:** Listed as a replacement for Sea-Doo OEM **420850373**.
– **40.5mm Internal Diameter:** Designed for carburettor applications requiring this opening size.
– **75.5mm Stud Centres:** Matches the specified mounting stud spacing.
– **Carburettor Base Sealing:** Helps maintain the intended seal between the carburettor and intake surface.
– **Engine Maintenance Application:** Suitable for replacing worn or damaged carburettor gaskets.
– **SBT Aftermarket Product:** Replacement gasket for compatible Sea-Doo engines.
## Why Replace a Carburettor Base Gasket?
The carburettor base gasket helps seal the connection between the carburettor and the engine’s intake system.
Over time, gasket material can deteriorate due to heat, age, vibration and normal engine operation.
A damaged or incorrectly installed gasket may allow unwanted air to enter the intake system, potentially affecting the air-fuel mixture and engine performance.
Replacing a worn gasket during carburettor servicing or reassembly helps maintain the correct sealing function.
## Signs Your Carb Base Gasket May Need Replacing
Common signs of a damaged carburettor base gasket include:
– Unstable or inconsistent idle
– Difficulty starting
– Poor throttle response
– Suspected intake air leaks
– Visible gasket deterioration
– Torn or damaged gasket material
– Gasket damage during carburettor removal
These symptoms may also result from carburettor adjustment, fuel system faults or other intake leaks. Proper diagnosis is recommended before replacing the gasket.
## Important Installation Information
Before installation, compare the replacement gasket with the original Sea-Doo component.
Confirm the following:
– **SBT SKU:** 41-102-01
– **OEM Reference:** 420850373
– **Internal Diameter:** 40.5mm
– **Stud Centre Spacing:** 75.5mm
– Correct carburettor configuration
– Gasket shape and mounting hole alignment
– Condition of the mating surfaces
Remove old gasket residue carefully and inspect the mating surfaces for damage.
Follow the appropriate Sea-Doo service manual for installation procedures and tightening specifications.
Professional installation is recommended where carburettor servicing or engine disassembly is required.
## Important Product Information
– This is an **SBT aftermarket replacement**, not a genuine Sea-Doo OEM gasket.
– **SKU:** 41-102-01
– **OEM Reference:** 420850373
– **Internal Diameter:** 40.5mm
– **Stud Centres:** 75.5mm
– Listed for selected **1993–1995 Sea-Doo XP, SPX and GTX** applications.
– Exact model-year and carburettor compatibility must be confirmed.
– **PRE ORDER:** Contact us for availability and estimated dispatch times.
The **Sea-Doo Carb Base Gasket 41-102-01** by SBT provides an aftermarket replacement sealing option for compatible Sea-Doo carburettor applications.
With OEM reference **420850373**, a **40.5mm internal diameter** and **75.5mm stud centres**, this gasket is suitable for replacing worn or damaged carburettor base gaskets during servicing and reassembly.





