# Sea-Doo Piston Ring Set 49-112-0 – 4-TEC Standard Size 2002–2015
The **Sea-Doo Piston Ring Set 49-112-0** is a new aftermarket OE replacement piston ring set designed for compatible **Sea-Doo 4-TEC engines**.
Listed for selected **Sea-Doo RXT, GTX, GTI, GTI SE and Sportster** applications within the **2002–2015** model range, this standard-size ring set corresponds to **Sea-Doo OEM part number 420888864**.
Piston rings are essential engine components that help maintain compression, control engine oil and transfer heat from the piston to the cylinder wall.
Whether you’re rebuilding a Sea-Doo 4-TEC engine, replacing worn piston rings or completing an internal engine repair, the **Sea-Doo Piston Ring Set 49-112-0** provides a replacement option for compatible standard-size piston applications.
## Product Details
– **SKU:** 49-112-0
– **Product Type:** Piston Ring Set
– **Application:** Sea-Doo 4-TEC Engine
– **Size:** Standard (STD)
– **Listed Year Range:** 2002–2015
– **Replacement Type:** New Aftermarket OE Replacement
– **OEM Reference:** 420888864
– **Condition:** New
## Compatible Sea-Doo Models
The **Sea-Doo Piston Ring Set 49-112-0** is listed for selected applications including:
– Sea-Doo RXT
– Sea-Doo GTX
– Sea-Doo GTI
– Sea-Doo GTI SE
– Sea-Doo Sportster
**Listed model-year range:** 2002–2015
**Important:** This is an overall application range, not confirmation that every model and engine variation produced during these years uses the same piston rings.
Compatibility must be checked against the specific engine and OEM part number **420888864**.
## Standard Size Piston Rings
The **Sea-Doo Piston Ring Set 49-112-0** is supplied in **standard size (STD)**.
Standard-size piston rings are intended for compatible engines using the original standard piston and cylinder dimensions.
They are not intended as a substitute for oversized rings in an engine that has been rebored or fitted with oversized pistons.
Before installation, the piston size, cylinder bore and manufacturer specifications should be checked.
Correct ring size is essential for proper compression, oil control and engine operation.
## Features & Benefits
### OE Replacement Design
An aftermarket replacement ring set for compatible Sea-Doo 4-TEC engine applications.
### Standard Size
Designed for engines requiring standard-size piston rings.
### OEM Reference
Listed as a replacement for Sea-Doo OEM part number **420888864**.
### Compression Sealing
Piston rings help seal the combustion chamber and limit combustion gas leakage past the piston.
### Engine Oil Control
The ring assembly helps regulate the oil film on the cylinder walls during engine operation.
### Heat Transfer
Piston rings assist in transferring heat from the piston to the cylinder wall.
### Engine Rebuilding
Suitable for compatible engine rebuilds, piston servicing and internal engine repairs.
## What Do Sea-Doo 4-TEC Piston Rings Do?
Piston rings are installed in grooves around the engine pistons.
As the piston moves up and down inside the cylinder, the rings maintain contact with the cylinder wall.
They perform three important functions.
### 1. Maintain Engine Compression
Compression rings help seal the combustion chamber.
This reduces the amount of combustion gas escaping past the piston into the crankcase.
Maintaining the correct seal is important for efficient combustion and engine performance.
### 2. Control Engine Oil
The piston ring assembly helps manage the lubricating oil film on the cylinder walls.
Proper oil control helps prevent excessive oil from entering the combustion chamber.
### 3. Transfer Heat
Piston rings help transfer heat from the piston to the cylinder wall.
This supports normal engine temperature management.
Together, these functions make piston rings essential to the reliable operation of a Sea-Doo 4-TEC engine.
## Signs of Worn or Damaged Piston Rings
Piston rings may wear over time due to repeated engine operation, overheating, contamination or internal engine damage.
Common symptoms include:
– **Low Compression:** Worn rings may allow combustion gases to escape past the piston.
– **Excessive Oil Consumption:** Poor oil control may allow additional oil into the combustion chamber.
– **Blue Exhaust Smoke:** Oil burning may produce visible blue smoke.
– **Reduced Engine Performance:** Compression loss may affect power output.
– **Increased Crankcase Blow-By:** Combustion gases may escape into the crankcase.
– **Difficult Starting:** Low compression may contribute to starting problems.
– **Damaged Cylinder Walls:** Scoring or excessive wear may accompany piston ring damage.
These symptoms may also result from valve problems, cylinder damage or other internal engine faults.
Compression testing, leak-down testing and mechanical inspection can help identify the cause.
## Why Replace Your Sea-Doo Piston Rings?
Piston rings operate under high temperatures and repeated mechanical loads.
Over time, the rings and cylinder walls may wear, reducing their ability to maintain the intended combustion seal.
Worn rings may contribute to compression loss, oil consumption and reduced engine performance.
Replacing worn piston rings during an appropriate engine rebuild can help restore the intended sealing and oil-control functions.
The **Sea-Doo Piston Ring Set 49-112-0** provides a standard-size replacement option for compatible Sea-Doo 4-TEC engines.
However, replacing piston rings alone will not correct excessive cylinder wear, damaged pistons or other internal engine problems.
All relevant components should be measured and inspected before reassembly.
## Ideal for Sea-Doo 4-TEC Engine Repairs
This standard-size piston ring set is suitable for compatible applications involving:
– Engine rebuilding
– Piston ring replacement
– Compression-related repairs
– Internal engine maintenance
– Piston servicing
– Restoration of worn engine components
– Reassembly following engine inspection
Correct ring selection and installation are essential for engine reliability.
## Important Installation Information
Piston ring replacement requires engine disassembly and precise measurements.
Before installation:
1. Confirm that SKU 49-112-0 is compatible with your Sea-Doo engine.
2. Verify the OEM reference **420888864**.
3. Confirm that the engine requires standard-size piston rings.
4. Inspect the pistons and cylinder bores for damage.
5. Measure cylinder bore dimensions and wear.
6. Check piston ring end gaps according to the applicable service manual.
7. Verify ring-to-groove clearances.
8. Install the rings in the correct positions and orientations.
9. Follow the manufacturer’s instructions for ring gap positioning.
10. Reassemble the engine using the specified procedures and torque settings.
**Important:** Incorrect piston ring size, clearance or installation can result in poor compression, excessive oil consumption or serious engine damage.
Professional installation is recommended.
## Important Product Information
**SKU:** 49-112-0
**Product:** Piston Ring Set
**Condition:** New
**Engine Application:** Sea-Doo 4-TEC
**Size:** Standard (STD)
**Listed Year Range:** 2002–2015
**OEM Reference:** 420888864
**Listed Applications:**
– Sea-Doo RXT
– Sea-Doo GTX
– Sea-Doo GTI
– Sea-Doo GTI SE
– Sea-Doo Sportster
Please confirm your exact model, model year, engine configuration and piston size before ordering.
**Quantity Notice:** Confirm the number of pistons serviced by one ring set before ordering. Do not assume this listing includes rings for the entire engine.
This listing is for the **standard-size piston ring set**, not a complete piston kit or engine rebuild kit.
The **Sea-Doo Piston Ring Set 49-112-0** provides an OE-style replacement for compatible Sea-Doo 4-TEC engines requiring standard-size rings and OEM reference 420888864, making it suitable for engine rebuilding and internal engine maintenance.





